FORD WSS-M1H715-A-2008 FABRIC MARQUIS PATTERN KNITTED UNLAMINATED - TO BE USED WITH FORD WSS-M99P1111-A 《侯爵(MARQUIS)图案的不分层针织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:livefirmly316 文档编号:752166 上传时间:2019-01-14 格式:PDF 页数:3 大小:22.58KB
下载 相关 举报
FORD WSS-M1H715-A-2008 FABRIC MARQUIS PATTERN KNITTED UNLAMINATED -  TO BE USED WITH FORD WSS-M99P1111-A  《侯爵(MARQUIS)图案的不分层针织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共3页
FORD WSS-M1H715-A-2008 FABRIC MARQUIS PATTERN KNITTED UNLAMINATED -  TO BE USED WITH FORD WSS-M99P1111-A  《侯爵(MARQUIS)图案的不分层针织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共3页
FORD WSS-M1H715-A-2008 FABRIC MARQUIS PATTERN KNITTED UNLAMINATED -  TO BE USED WITH FORD WSS-M99P1111-A  《侯爵(MARQUIS)图案的不分层针织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第3页
第3页 / 共3页
亲,该文档总共3页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 11 26 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE2003 04 10 Revised Para 3.0 inserted; Para 3.1, 3.2, 3.3, 3.14, 3.15, 4 deleted 1996 07 29 Activated N.J. Komatsu Printed copies are unc

2、ontrolled Page 1 of 3 Copyright 2008, Ford Global Technologies, Inc. FABRIC, MARQUIS PATTERN, KNITTED, UNLAMINATED WSS-M1H715-A FABRIC, MARQUIS PATTERN, KNITTED, 3mm WSS-M1H715-B1 FABRIC, MARQUIS PATTERN, KNITTED, 6mm WSS-M1H715-B2 FABRIC, MARQUIS PATTERN, KNITTED, 3mm WSS-M1H715-C1 FABRIC, MARQUIS

3、PATTERN, KNITTED, 6mm WSS-M1H715-C2 NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by these specifications is a 3 bar 28 gauge, warp knitted simulated velour polyester bodycloth. 2. APPLICATION These specifications were originally released for material used as interior trim fabrics. MAR

4、QUIS PATTERN WSS-M1H715-A Unlaminated WSS-M1H715-B1 3.0 mm flame laminated to polyether foam and knitted fabric WSS-M1H715-B2 6.0 mm flame laminated to polyether foam and knitted fabric WSS-M1H715-B2 6.0 mm flame laminated to polyether foam and knitted fabric WSS-M1H715-C1 3.0 mm flame laminated to

5、polyester foam and knitted fabric WSS-M1H715-C2 6.0 mm flame laminated to polyester foam and knitted fabric 3. REQUIREMENTS In addition to the requirements listed herein, the fabric or laminate shall meet all requirements of WSB-M8P1-I. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material sup

6、pliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). ENGINEERING MATERIAL SPECIFICATION WSS-M1H715-A/B1/B2/C1/C2 Page 2 of 3 Copyright 2008, Ford Global Technologies, Inc. 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5% tolerance

7、ASTM D 3887) Wales 145 ends 10/cm Courses 235 picks 10/cm 3.4.2 Fabric Weight, range 310 - 390 g/m2(FLTM BN 106-01) (350 average)3.5 COMPOSITION (ASTM D 629) Fabric 100 % polyester 3.6 YARN CONSTRUCTION (ASTM D 1244) Pile 76 dTex f 24 (polyester, fuly-dul) Middle 78 dtex f 24 (polyester bight) Back

8、 78 dtex f 24 (polyester semi-dul) 3.7 METHOD OF DYEING Yarn dyed or as approved by Material Enginering 3.8 FINISHED OPERATIONS As approved by Material Engineering 3.9 REQUIREMENTS FOR POLYETHER FOAM As specified in WSD-M2D243-A2 3.10 REQUIREMENTS FOR BACKING As pecifed inFABRIC WSD-M9H125-B2 ENGINE

9、ERING MATERIAL SPECIFICATION WSS-M1H715-A/B1/B2/C1/C2 Page 3 of 3 Copyright 2008, Ford Global Technologies, Inc. 3.11 REQUIREMENTS FOR THE FLAME LAMINATED MATERIAL 3.11.1 Thickness, range (ASTM D 1777, circular presser foot area 645 mm2, 2.8 g force, 43 Pa pressure) WSS-M1H715-B1 3.0 +/- 1.0 mm WSS-

10、M1H715-B2 6.0 +/- 1.0 mmWSS-M1H715-C1 3.0 +/- 1.0 mm WSS-M1H715-C2 6.0 +/- 1.0 mm3.11.2 Weight, min (FLTM BN 106-01) WSS-M1H715-B1 470 +/- 50 g/m2WSS-M1H715-B2 590 +/- 50 g/m2WSS-M1H715-C1 450 +/- 50 g/m2WSS-M1H715-C2 550 +/- 50 g/m23.12 BACK MARKING The contrast between the batch marking print and

11、the backing fabric must be no greater than that shown by the master sample approved by Materials & Fastener Engineering. 3.13 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of these specifications. 5.1 Purchase departments will ensure that both materials defined in these specifications and shipped to any one assembly plant will be produced by one supplier only.

展开阅读全文
相关资源
猜你喜欢
  • BS EN 14584-2013 Non-destructive testing Acoustic emission testing Examination of metallic pressure equipment during proof testing Planar location of AE sources《无损检测 声学辐射检测 验收试验过程中.pdf BS EN 14584-2013 Non-destructive testing Acoustic emission testing Examination of metallic pressure equipment during proof testing Planar location of AE sources《无损检测 声学辐射检测 验收试验过程中.pdf
  • BS EN 14585-1-2006 Corrugated metal hose assemblies for pressure applications - Requirements《压力设备用金属波纹软管组件 要求》.pdf BS EN 14585-1-2006 Corrugated metal hose assemblies for pressure applications - Requirements《压力设备用金属波纹软管组件 要求》.pdf
  • BS EN 14587-1-2007 Railway applications - Track - Flash butt welding of rails - New R220 R260 R260Mn and R350HT grade rails in a fixed plant《轨道交通 轨道 钢轨的闪光对接焊 固定厂房中新型的R220、R260、R260.pdf BS EN 14587-1-2007 Railway applications - Track - Flash butt welding of rails - New R220 R260 R260Mn and R350HT grade rails in a fixed plant《轨道交通 轨道 钢轨的闪光对接焊 固定厂房中新型的R220、R260、R260.pdf
  • BS EN 14587-2-2009 Railway applications - Track - Flash butt welding of rails - Part 2 New R220 R260 R260Mn and nR350HT grade rails by mobile welding nmachines at sites other than .pdf BS EN 14587-2-2009 Railway applications - Track - Flash butt welding of rails - Part 2 New R220 R260 R260Mn and nR350HT grade rails by mobile welding nmachines at sites other than .pdf
  • BS EN 14587-3-2012 Railway applications Track Flash butt welding of rails Welding in association with crossing construction《轨道交通 轨道 钢轨的闪光对接焊 与交叉建设相关的焊接》.pdf BS EN 14587-3-2012 Railway applications Track Flash butt welding of rails Welding in association with crossing construction《轨道交通 轨道 钢轨的闪光对接焊 与交叉建设相关的焊接》.pdf
  • BS EN 14591-1-2004 Explosion prevention and protection in underground mines-Protective systems-Part 1 2-bar explosion proof ventilation structure《工作场所空气 容积式生物悬浮微粒取样装置 要求和试验方法》.pdf BS EN 14591-1-2004 Explosion prevention and protection in underground mines-Protective systems-Part 1 2-bar explosion proof ventilation structure《工作场所空气 容积式生物悬浮微粒取样装置 要求和试验方法》.pdf
  • BS EN 14591-2-2007 Explosion prevention and protection in underground mines - Protective systems - Passive water trough barriers《地下矿井中的防爆和保护 保护系统 钝态水槽屏障物》.pdf BS EN 14591-2-2007 Explosion prevention and protection in underground mines - Protective systems - Passive water trough barriers《地下矿井中的防爆和保护 保护系统 钝态水槽屏障物》.pdf
  • BS EN 14591-4-2007 Explosion prevention and protection in underground mines - Protective systems - Automatic extinguishing systems for road headers《地下矿井中的防爆和保护 保护系统 掘进机用自动灭火系统》.pdf BS EN 14591-4-2007 Explosion prevention and protection in underground mines - Protective systems - Automatic extinguishing systems for road headers《地下矿井中的防爆和保护 保护系统 掘进机用自动灭火系统》.pdf
  • BS EN 14593-1-2005 en 8699 Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Apparatus with a full mask - Requirements testing marking《呼吸.pdf BS EN 14593-1-2005 en 8699 Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Apparatus with a full mask - Requirements testing marking《呼吸.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1