FORD WSS-M1H793-A-2008 FABRIC ANTALYA PATTERN WOVEN JACQUARD UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《安塔利亚(ANTALYA)图案的不分层提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:dealItalian200 文档编号:752248 上传时间:2019-01-14 格式:PDF 页数:2 大小:20.29KB
下载 相关 举报
FORD WSS-M1H793-A-2008 FABRIC ANTALYA PATTERN WOVEN JACQUARD UNLAMINATED  TO BE USED WITH FORD WSS-M99P1111-A  《安塔利亚(ANTALYA)图案的不分层提花机织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共2页
FORD WSS-M1H793-A-2008 FABRIC ANTALYA PATTERN WOVEN JACQUARD UNLAMINATED  TO BE USED WITH FORD WSS-M99P1111-A  《安塔利亚(ANTALYA)图案的不分层提花机织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 12 03 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE2003 02 21 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.3, 3.10, 3.11, 4 deleted 1998 06 08 Activated N.J. KomatPrinted copies are uncon

2、trolled Page 1 of 2 Copyright 2008, Ford Global Technologies, Inc. FABRIC, ANTALYA PATTERN, WOVEN JACQUARD, WSS-M1H793-A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was rele

3、ased originally for material used as an interior trim fabric for use in India. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part

4、producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D375) Warp 250 ends/10 cm Weft 170 picks/10 cm 3.4.2 Fabric Weight, range (FLTM BN 106-01) 220 - 260 g/m23.5 COMPOSITION (ASTM D

5、 629) Fabric 100 % polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H793-A Page 2 of 2 Copyright 2008, Ford Global Technologies, Inc. 3.6 YARN CONSTRUCTION (ASTM D 1244) Warp 540 dtex f172, round, air texturized Weft 400 dtex f136, round, air texturized 540 dtex f172, round, air texturized 3.7 MET

6、HOD OF DYEING Yarn dyed or as approved by Materials Enginering 3.8 FINISHED OPERATIONS As approved by Materials Engineering 3.9 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a fully bonded composite. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification: 5.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.

展开阅读全文
相关资源
猜你喜欢
  • BS 4929-1-1973 Specification for steel hexagon prevailing-torque type nuts Metric series《常作用扭矩式钢质六角螺母规范 第1部分 米制尺寸》.pdf BS 4929-1-1973 Specification for steel hexagon prevailing-torque type nuts Metric series《常作用扭矩式钢质六角螺母规范 第1部分 米制尺寸》.pdf
  • BS 4929-2-1973 Specification for steel hexagon prevailing-torque type nuts - Unified (inch) series《常扭矩式钢质六角螺母规范 第2部分 统一英制系列》.pdf BS 4929-2-1973 Specification for steel hexagon prevailing-torque type nuts - Unified (inch) series《常扭矩式钢质六角螺母规范 第2部分 统一英制系列》.pdf
  • BS 4933-2010 Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts《ISO公制黑色罩头和沉头螺拴 螺钉和六角螺母规范》.pdf BS 4933-2010 Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts《ISO公制黑色罩头和沉头螺拴 螺钉和六角螺母规范》.pdf
  • BS 4938-1-1982 Dirt content of milk - Method for the determination of dirt content (reference method)《牛奶污垢含量 第1部分 测定方法(比对法)》.pdf BS 4938-1-1982 Dirt content of milk - Method for the determination of dirt content (reference method)《牛奶污垢含量 第1部分 测定方法(比对法)》.pdf
  • BS 4938-2-1982 Dirt content of milk - Method for the determination of visible dirt content (rapid method)《牛奶污垢含量 第2部分 可见污垢含量的测定方法(快速法)》.pdf BS 4938-2-1982 Dirt content of milk - Method for the determination of visible dirt content (rapid method)《牛奶污垢含量 第2部分 可见污垢含量的测定方法(快速法)》.pdf
  • BS 4938-2P-1982 Dirt content of milk - Photographic standards for the method for the determination of visible dirt content of milk (rapid method)《牛奶污垢含量 第2P部分 牛奶中可见污垢含量测定方法(快速法)影像标.pdf BS 4938-2P-1982 Dirt content of milk - Photographic standards for the method for the determination of visible dirt content of milk (rapid method)《牛奶污垢含量 第2P部分 牛奶中可见污垢含量测定方法(快速法)影像标.pdf
  • BS 4939-1987 Method for determination of thickness loss of textile floor coverings after prolonged heavy static loading《铺地纺织物承受长期静态重负荷后厚度损失的测定方法》.pdf BS 4939-1987 Method for determination of thickness loss of textile floor coverings after prolonged heavy static loading《铺地纺织物承受长期静态重负荷后厚度损失的测定方法》.pdf
  • BS 4940-1-1994 Technical information on construction products and services - Guide for management《建筑产品及服务技术信息 第1部分 管理指南》.pdf BS 4940-1-1994 Technical information on construction products and services - Guide for management《建筑产品及服务技术信息 第1部分 管理指南》.pdf
  • BS 4940-2-1994 Technical information on construction products and services - Guide to content and arrangement《建筑产品及服务技术信息 内容和编排指南》.pdf BS 4940-2-1994 Technical information on construction products and services - Guide to content and arrangement《建筑产品及服务技术信息 内容和编排指南》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1