1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 12 17 N-STATUS No Replacement B. Haggart, FNA 2003 02 24 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.3, 3.10, 3.11, 4 deleted 1999 02 18 Activated L. Daniv-Zarewych Printed copies are uncontrolled Page
2、 1 of 2 Copyright 2008, Ford Global Technologies, Inc. FABRIC, VISTA PATTERN, WOVEN WSS-M1H799-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a Jacquard pattern, flat woven body cloth of good quality and uniform composition. 2. APPLICATION This specification w
3、as released originally for material used as an interior trim fabric for 2001 Explorer XLS insert fabric. The fabric is used backcoated and laminated. 3. REQUIREMENTS In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.0 STANDARD
4、REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 175 ends/10 cm Fill 126 picks/10 cm 3.4.2 Fabric
5、Weight, range 411 - 487 g/m2(FLTM BN 106-01) 3.5 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 100 % Polyester Backoating Acrylic ENGINEERING MATERIAL SPECIFICATION WSS-M1H799-A Page 2 of 2 Copyright 2008, Ford Global Technologies, Inc. 3.6 YARN CONSTRUCTION (ASTM D 1244)
6、 Warp 80 tex f200 (air textured polyester, 4.0 dtex) Fill 74 tex f136 (air textured polyester, 5.5 dtex) 3.7 METHOD OF DYEING Package Dye 3.8 FINISHING OPERATIONS Needle, Coat, Laminate 3.9 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a
7、 fully bonded composite. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
