1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 12 04 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE 2003 02 26 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.3, 3.10, 3.11, 4 deleted 1999 08 23 Activated N.J. Komatsu Printed copies are u
2、ncontrolled Page 1 of 2 Copyright 2008, Ford Global Technologies, Inc. FABRIC, RIMINI PATTERN, 44 GAUGE DBR WSS-M1H814-A KNITTED, UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a 6 bar - 44 gauge DNB knitted, polyester face fabric. 2. APPLICATION Thi
3、s specification was released originally for material used as an interior trim fabric for 2001 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS M
4、aterial suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 10 % tolerance (ASTM D 3887) Wales 90 Wales/10 cm Courses 115 Courses/10 cm 3.4.2 Fabric Weight, +/- 15 % tolerance (FLTM
5、 BN 106-01) 315 g/m23.5 COMPOSITION (ASTM D 629) Fabric 100 % polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H814-A Page 2 of 2 Copyright 2008, Ford Global Technologies, Inc. 3.6 YARN CONSTRUCTION (ASTM D 1244) No.1 Bar 76 dtex f24 (polyester, spun-dyed yarn, texturized) No.2 Bar 100 dtex f24 (p
6、olyester, semi-dul, texturized) No.3 Bar 270 dtex f72 (polyester, bright, exturized) No.4 Bar 270 dtex f72 (polyester, bright, exturized) No.5 Bar 100 dtex f24 (polyester, semi-dul, texturized) No.6 Bar 76 dtex f24 (polyester, spun dyed yarn, texturised) 3.7 METHOD OF DYEING Yarn dyed and spun or as
7、 approved by Materials Engineering 3.8 FINISHED OPERATIONS As approved by Materials Engineering 3.9 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a fully bonded composite. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
