1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 2 2011 05 24 Revised Para 3.2.2, 3.4 revised and editorial changes M. Dumitrescu, NA 2003 02 26 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.3, 3.9, 3.10, 4 deleted 1999 10 27 Activated L. Daniv, NA Printed copies are uncontrolled Copyri
2、ght 2011, Ford Global Technologies, Inc. Page 1 of 3 FABRIC, MYRIAD PATTERN, WOVEN WSS-M1H817-A 1. SCOPE The material defined by this specification is a Myriad pattern, flat woven. 2. APPLICATION This specification was released originally for material used as an interior trim fabric used only for se
3、atbacks and side facings. Myriad fabric was developed to be similar to Twill pattern. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4.This material will be used only on Class C surfaces: seatbacks, and facings (please refer to
4、 Figures 1 and 2). The material will be backcoated and/or laminated based on trimmability evaluation. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONS
5、TRUCTION 3.2.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 281 ends/10 cm Fill 196 picks/10 cm 3.2.2 Fabric Weight, (FLTM BN 106-01) Face fabric, +/- 5% , 201 g/m2 Backcoat, +/- 17% 24 g/m2 Total, +/- 7% 225 g/m2 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester Backcoating 100% EVA ENGINEER
6、ING MATERIAL SPECIFICATION WSS-M1H817-A Printed copies are uncontrolled Copyright 2011, Ford Global Technologies, Inc. Page 2 of 3 3.4 YARN CONSTRUCTION, Tex (ASTM D 1244) Warp 16.7 tex (semi-dull polyester FT textured) x 2Fill 16.7 tex (semi-dull polyester FT textured) x 2 3.5 METHOD OF DYEING Piec
7、e Dyed 3.6 FINISHING OPERATIONS Heatset, Coat, Inspect 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase department will ensure that the material defined in this specification and shipped to
8、 any one assembly plant will be produced by one supplier only. 5. SUMMARY OF REVISIONS 2011 05 24 Revised Fabric weight and yarn construction. ENGINEERING MATERIAL SPECIFICATION WSS-M1H817-A Printed copies are uncontrolled Copyright 2011, Ford Global Technologies, Inc. Page 3 of 3 Figure 1 Figure 2
