FORD WSS-M1H826-A-2008 FABRIC NEPTUNE PATTERN WOVEN JACQUARD UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《海王星(NEPTUNE)图案的不分层提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:rimleave225 文档编号:752280 上传时间:2019-01-14 格式:PDF 页数:2 大小:32.34KB
下载 相关 举报
FORD WSS-M1H826-A-2008 FABRIC NEPTUNE PATTERN WOVEN JACQUARD UNLAMINATED  TO BE USED WITH FORD WSS-M99P1111-A  《海王星(NEPTUNE)图案的不分层提花机织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共2页
FORD WSS-M1H826-A-2008 FABRIC NEPTUNE PATTERN WOVEN JACQUARD UNLAMINATED  TO BE USED WITH FORD WSS-M99P1111-A  《海王星(NEPTUNE)图案的不分层提花机织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 12 04 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE2003 02 28 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.3, 3.10, 3.11, 4 deleted 2000 07 31 Activated N. J. Komatsu Printed copies are u

2、ncontrolled Page 1 of 2 Copyright 2008, Ford Global Technologies, Inc. FABRIC, NEPTUNE PATTERN, WOVEN JACQUARD, WSS-M1H826-A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was

3、released originally for material used as an interior trim fabric for the 2001 model year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material supplier

4、s and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 270 ends/10 cm Weft 165 picks/10 cm 3.4.2 Fabric Weight, min (FLTM BN 106-01) 330 g/m23.5 COMPOSITION (A

5、STM D 629) Fabric 100 % polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H826-A Page 2 of 2 Copyright 2008, Ford Global Technologies, Inc. 3.6 YARN CONSTRUCTION (ASTM D 1244) Warp 620 dtex f144 (air texturised, semi-dul, round) Weft 830 dtex f192 (air texturised, semi-dul, round) 3.7 METHOD OF DYE

6、ING Yarn dyed and spun or as approved by Materials Engineering 3.8 FINISHED OPERATIONS As approved by Materials Engineering 3.9 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a fully bonded composite. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification: 5.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.

展开阅读全文
相关资源
猜你喜欢
  • EN ISO 10717-2010 en Footwear - Test method for slide fasteners - Burst strength《鞋类 测试方法拉链 突发强度》.pdf EN ISO 10717-2010 en Footwear - Test method for slide fasteners - Burst strength《鞋类 测试方法拉链 突发强度》.pdf
  • EN ISO 10720-2007 en Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas《钢和铁 氮含量的测定 惰性气体流中熔解后热电导法》.pdf EN ISO 10720-2007 en Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas《钢和铁 氮含量的测定 惰性气体流中熔解后热电导法》.pdf
  • EN ISO 10722-2007 en Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material《土工合成织物 重复载荷下机械损伤评定用索引试.pdf EN ISO 10722-2007 en Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material《土工合成织物 重复载荷下机械损伤评定用索引试.pdf
  • EN ISO 10723-2012 en Natural gas - Performance evaluation for analytical systems《天然气 分析系统的性能评定》.pdf EN ISO 10723-2012 en Natural gas - Performance evaluation for analytical systems《天然气 分析系统的性能评定》.pdf
  • EN ISO 10724-1-2001 en Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 1 General Principles and Moulding of Multipurpose Te.pdf EN ISO 10724-1-2001 en Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 1 General Principles and Moulding of Multipurpose Te.pdf
  • EN ISO 10724-2-2000 en Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 2 Small Plates《塑料 热固性粉末模塑复合物试样的注射模塑成型(PMCs) 第2部分 小板材.pdf EN ISO 10724-2-2000 en Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 2 Small Plates《塑料 热固性粉末模塑复合物试样的注射模塑成型(PMCs) 第2部分 小板材.pdf
  • EN ISO 10734-2016 en Footwear - Test method for slide fasteners - Strength of slide fastener pullers《鞋类-试验方法拉链-破裂强度》.pdf EN ISO 10734-2016 en Footwear - Test method for slide fasteners - Strength of slide fastener pullers《鞋类-试验方法拉链-破裂强度》.pdf
  • EN ISO 10748-2011 en Footwear - Test method for slide fasteners - Slider locking strength《鞋类 拉链测试方法 滑动件锁定强度》.pdf EN ISO 10748-2011 en Footwear - Test method for slide fasteners - Slider locking strength《鞋类 拉链测试方法 滑动件锁定强度》.pdf
  • EN ISO 10751-2016 en Footwear - Test methods for slide fasteners - Resistance to repeated opening and closing《拉链耐反复开合鞋类试验方法(ISO 10751 2016)》.pdf EN ISO 10751-2016 en Footwear - Test methods for slide fasteners - Resistance to repeated opening and closing《拉链耐反复开合鞋类试验方法(ISO 10751 2016)》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1