1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 12 04 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE2003 04 28 Revised Para 3.0 inserted, para 3.1, 3.2 & 3.3 deleted Para 2, 3.4 and 3.6 revised M. Dumitrescu 2000 11 21 Activated N. J. K
2、omatsu Printed copies are uncontrolled Page 1 of 2 Copyright 2008, Ford Global Technologies, Inc. FABRIC, BRONTE PATTERN, PILE KNITTED, WSS-M1H842-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a 4 bar 28 gauge warp knitted, simulated velour, polyester bodyclo
3、th. 2. APPLICATION This specification was released originally for material used in: - Europe as an interior trim fabric for 2001 Model Year - North America as a seat bolster fabric for D258 2004 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requ
4、irements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5% tolerance (ASTM D
5、 3887) Europe North America Wales/10cm 144 137 Cources/10cm 225 228 3.4.2 Fabric Weight, range 393 436 g/m2(FLTM BN 106-01) ENGINEERING MATERIAL SPECIFICATION WSS-M1H842-A Page 2 of 2 Copyright 2008, Ford Global Technologies, Inc. 3.5 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.6 YARN CONSTRUCT
6、ION (ASTM D 1244) North America Europe Face (A) 80 dtex f36 (polyester 78 dtex f47 (polyester, semi-dull, round) special cross section, dull) (B) 77 dtex f47 (polyester 76 dtex f32 (polyester, dull ribbon) semi-dull, round) Middle 77 dtex f36 (polyester 76 dtex f24 (polyester, Semi-dull round semi-d
7、ull, round) Back 77 dtex f36 (polyester 76 dtex f24 (polyester, Semi-dull round) semi-dull, round) 3.7 METHOD OF DYEING Piece dyed or as approved by Materials Engineering 3.8 FINISHING OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
