1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2003 04 17 Revised Para 3.0 inserted; Para 3.1, 3.2, 3.3, 3.9, 3.10, 4 deleted 2002 03 22 Activated N. J. Komatsu Printed copies are uncontrolled Page 1 of 2 Copyright 2003, Ford Global Technologies, Inc. FA
2、BRIC, HUMY PATTERN, WOVEN JACQUARD, WSS-M1H883-A UNLAMINATED 1. SCOPE The material defined by this specification is a jacquard woven polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for C214 model year 2003. 3. REQUIREMENTS
3、 In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable for commercial vehicle application. Material specification requirements are to be used for initial qualification of materials. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERI
4、ALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 245 ends/10 cm Weft 165 picks/10 cm 3.4.2 Fabric Weight, +/- 15% tolerance (FLTM BN
5、 106-01) 300 g/m23.5 COMPOSITION (ASTM D 629) Fabric 100 % polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H883-A Page 2 of 2 Copyright 2003, Ford Global Technologies, Inc. 3.6 YARN CONSTRUCTION (ASTM D 1244) Warp 620 dtex f144 (Polyester, dull, air texturized, round) 680 dtex f192, air texturize
6、d, bright, tri-lobal) Weft 620 dtex f192 (Polyester, dull, air texturized, round) 540 dtex f144 (air texturized, bright, triangular) 3.7 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.8 FINISHING OPERATION As approved by Materials Engineering 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
