1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2015 01 22 N Status No replacement or usage D. Murtonen, NA 2003 07 11 Activated M. Dumitrescu Controlled document at www.MATS Copyright 2015, Ford Global Technologies, Inc. Page 1 of 2 FABRIC, MORTAR PATTERN, KNIT, WSS-M1H890-A2 SEAT ARMREST
2、 NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a MORTAR PATTERN, a 56 Gauge, Single Raschel knit, body cloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for P-15
3、0 2004 Ranger and P221 seat armrest. The fabric is backcoated with flame retardant (FR) backcoat to meet the flammability requirement. 3. REQUIREMENTS In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUIREMENTS FO
4、R PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Wales 129.9 wales/10 cm Courses 146 courses/ 10 cm 3.2.2 Fabric Weight
5、, +/- 5% g/m2 (FLTM BN 106-01) Laminated * Face w/Backcoat 425 264 * 3 mm foam thickness ENGINEERING MATERIAL SPECIFICATION WSS-M1H890-A2 Copyright 2015, Ford Global Technologies, Inc. Page 2 of 2 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 100% Polyester Backcoat Acrylic with FR 3.4 YARN CONSTRUCTION (ASTM D 1244) Face 16.7 tex f36 (Semi dull Polyester) Middle 16.7 tex f36 (Semi dull Polyester) Back 16.7 tex f36 (Semi dull Polyester) 3.5 METHOD OF DYEING Piece Dye 3.6 FINISHING OPERATIONS Knit, Setmake, Backcoat Dye, Tender Dry, Inspect
