1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2005 09 15 Activated M. Dumitrescu Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 1 of 2 FABRIC, MORTAR GF PATTERN, WARP KNIT WSS-M1H890-A4 1. SCOPE The material defined by this specification is a MORTAR GF
2、PATTERN, 3 bars, 28 Gauge, Tricot knit, body cloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for U204 Escape 2006, insert/bolster seat. 3. REQUIREMENTS In addition, to the requirements listed herein
3、, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count
4、, +/- 5% tolerance (ASTM D 3887) Wales 130 wales/10 cm Courses 170 courses/ 10 cm 3.2.2 Fabric Weight, +/- 5% g/m2 (FLTM BN 106-01) Laminated * Face w/no Backcoat 510 350 * 3 mm foam thickness 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 100% Polyester ENGINEERING MA
5、TERIAL SPECIFICATIONWSS-M1H890-A4 Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Face 16.7 tex f36 (Semi dull Polyester) Middle 16.7 tex f36 (Semi dull Polyester) Back 16.7 tex f36 (Semi dull Polyester) 3.5 METHOD OF DYEING Piece Dye 3.6 FINISHING OPERATIONS Knit, preset, dye, heatset, inspect
