1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 12 05 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE 2004 07 12 Activated N. J. Komatsu Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, OCEAN PATTERN, WEFT KNITTED, WSS-M1H90
2、7-A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a weft knitted jacquard 20 gauge polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2002 Model Year Mexico. 3. REQUIREME
3、NTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-
4、M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3887) Wales 100 wales/10 cm Courses 173 courses/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance (FLTM BN 106-01) 495 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Pile 150 dte
5、x f34, (polyester, false twist, semi-dull). Ground 210 dtex f64 (polyester, false twist, semi-dull). ENGINEERING MATERIAL SPECIFICATIONWSS-M1H907-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Packaged dyed or as approved by Materials
6、 Engineering 3.6 FINISHED OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
