1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 12 08 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE 2004 07 12 Activated N. J. Komatsu Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, FISHER PATTERN, WOVEN JACQUARD, WSS-M1
2、H910-A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2002 Model Year Mexico. 3. REQUIREMENTS In additi
3、on to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A).
4、3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 210 ends/10 cm Weft 195 picks/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance 470 g/m2(FLTM BN 106-01) Backcoatings Acrylic 3.3 COMPOSITION (ASTM D 629) Fabric 75% polyester 25% polypropylene ENGINEERING MATERIAL SPECIFICAT
5、IONWSS-M1H910-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 620 dtex f144 (polyester, air jet texturized, semi-dull) Weft 560 dtex f141 (polyester, semi-dull, air jet texturized) 630 dtex f1, (polypropylene dull,
6、air jet texturized) 3.5 METHOD OF DYEING Package dyed or as approved by Materials Engineering 3.6 FINISHING OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
