1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 2 2011 09 29 Revised Add optional process M. Montgomery, FOE 2009 12 10 Revised Para 2 , 3.6 , 4.2 , 4.3 M. Montgomery, EU 2004 07 13 Activated N. J. Komatsu Controlled document at www.MATS Copyright 2011, Ford Global Technologies, LLC P
2、age 1 of 2 FABRIC, LUX PATTERN, WOVEN DOBBY, WSS-M1H913-A UNLAMINATED 1. SCOPE The material defined by this specification is a dobby woven polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for CD132 model year 2003 5. Fabric
3、 developed using a Tri-Laminate construction with no back coating. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable for commercial vehicle application. Material specification requirements are to be used for i
4、nitial qualification of materials. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 2
5、70 ends/10 cm Weft 180 picks/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance (FLTM BN 106-01) 315 g/m2 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 600 dtex f144 (Polyester, semi-dull, air texturized, round section) Weft 600 dtex f144 (Polyester, semi-dull
6、 air texturized, round section) ENGINEERING MATERIAL SPECIFICATION WSS-M1H913-A Copyright 2011, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Yarn dyed or Solution dyed as Approved by Materials Engineering 3.6 FINISHING OPERATION - Washing - Drying - Setting (Optional Process-Calen
7、dared) As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications 4.1 Purchase departments will ensure th
8、at both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only. 4.2 Global C346 strategy to use Tri-Laminate construction in all regions. 4.3 If yarn is locally sourced it must meet the above fabric construction, composition and Yarn construction. The fabric must also meet the requirements of WSS-M8P18-A1/A2/A3/A4. 5. SUMMARY OF REVISIONS 2011 Added optional calendared finishing process
