1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 3 2012 08 17 Revised Released A2 for calendared M. Montgomery, FOE 2011 09 29 Revised Optional calendared process added M. Montgomery, FOE 2004 07 13 Activated N. J. Komatsu Controlled document at www.MATS Copyright 2012, Ford Global Tec
2、hnologies, LLC Page 1 of 2 FABRIC, LUX PATTERN, WOVEN DOBBY, WSS-M1H913-A UNLAMINATED FABRIC, LUX PATTERN, WOVEN DOBBY, WSS-M1H913-A2 UNLAMINATED, CALENDERED 1. SCOPE The material defined by this specification is a dobby woven polyester face fabric. A2 version has an additional calendaring process t
3、o give softer hand product. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for CD132 model year 2003 5. Fabric developed using a Tri-Laminate construction with no back coating. 3. REQUIREMENTS In addition to the requirements listed herein, the
4、fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable for commercial vehicle application. Material specification requirements are to be used for initial qualification of materials. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must confo
5、rm to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 270 ends/10 cm Weft 180 picks/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance (FLTM BN 106-01) 315 g/m2 3.3 COMPOSITION (ASTM D629) Fabric
6、 100% polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H913-A/A2 Copyright 2012, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D1244) Warp 600 dtex f144 (Polyester, semi-dull, air texturized, round section) Weft 600 dtex f144 (Polyester, semi-dull, air texturized, round sec
7、tion) 3.5 METHOD OF DYEING Yarn dyed or Solution dyed as Approved by Materials Engineering 3.6 FINISHING OPERATION - Washing - Drying - Setting - Calendared (A2 Only) As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance
8、in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only. 4.2 Global C346
9、 strategy to use Tri-Laminate construction in all regions. 4.3 If yarn is locally sourced it must meet the above fabric construction, composition and Yarn construction. The fabric must also meet the requirements of WSS-M8P18-A1/A2/A3/A4. 5. SUMMARY OF REVISIONS 2012 08 17 Release A2 suffix for the calendared material, previously optional. 2011 09 29 Added optional calendared finishing process
