1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 12 08 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE 2003 01 08 Activated N. J. Komatsu Printed copies are uncontrolled Page 1 of 2 Copyright 2008, Ford Global Technologies, Inc. FABRIC, S
2、QUEEZE PATTERN, WOVEN JACQUARD, WSS-M1H923-A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for the 2002 Mo
3、del Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Prod
4、uction Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 345 ends/10 cm Weft 160 picks/10 cm 3.2.2 Fabric Weight, range. (FLTM BN 106-01) 285 - 315g/m23.3 COMPOSITION (ASTM D 629) Fabric 100 % polyester ENGINEERING MATERIAL SPECIFICATION WSS
5、-M1H923-A Page 2 of 2 Copyright 2008, Ford Global Technologies, Inc. 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 540 dtex f128 (Polyester, air texturised, round, semi-dull) Weft 540 dtex f144 (Polyester, air texturised, bright, tri-lobal) 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engin
6、eering 3.6 FINISHING OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
