1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2003 02 25 Activated M. Dumitrescu Printed copies are uncontrolled Page 1 of 2 Copyright 2003, Ford Global Technologies, Inc. FABRIC, EMIL PATTERN, FLAT WOVEN WSS-M1H928-A 1. SCOPE The material defined by th
2、is specification is a EMIL pattern, Jacquard flat woven bodycloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an insert of seat fabric for the 2004 C264 FOCUS FUEL-CELL 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTIO
3、N MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5
4、 % tolerance (ASTM D 3775) Warp 504 ends/10 cm Fill 185 picks/10 cm 3.2.2 Fabric Weight, range (FLTM BN 106-01) Face Fabric w/ backcoat 232 - 257 g/m2Laminated to 3mm foam 382 - 423 g/m2ENGINEERING MATERIAL SPECIFICATION WSS-M1H928-A Page 2 of 2 Copyright 2003, Ford Global Technologies, Inc. 3.3 COM
5、POSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4. Fabric 100 % Polyester Backcoating EVA 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 16.7 tex f34 (false twist textured semi- dull polyester) polyester) Fill 16.7 tex f68 (air jet textured semi-dull polyester) X 3 3.5 METHOD OF DYEING Piece/Disperse Dyes 3.6 FINISHING OPERATIONS Wash, Jet Scour, Dye, Scutch, Dry/treat, Nap/Shear (2 Pass), Backcoat,
