1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 12 09 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE 2004 07 13 Activated N. J. Komatsu Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, PEARL PATTERN, WOVEN JACQUARD, WSS-M1H
2、939-A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a woven polyester & polyamide face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the 2003 Model Year, J-97. 3. REQUIREMEN
3、TS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M
4、99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, range (ASTM D 3775) Warp 157 ends/10 cm Weft 145 picks/10 cm 3.2.2 Fabric Weight, +/- 15% tolerance (FLTM BN 106-01) 467 g/m23.3 COMPOSITION (ASTM D 629) Fabric 56% polyester 44% polyamide ENGINEERING MATERIAL SPECIFICATIONWSS-M1H939-A Printed
5、copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 840 dtex f192 (air texturized, Semi-dull, round) Weft 790 dtex f178 (air texturized, semi-dull round) 1340 dtex f504 (air texturized, polyester, bright) 2.7 Nm flock yarn (polya
6、mide) 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
