FORD WSS-M1H941-A-2015 FABRIC TANGO PATTERN KNIT DOOR INSERT TO BE USED WITH FORD WSS-M99P1111-A .pdf

上传人:eventdump275 文档编号:752400 上传时间:2019-01-14 格式:PDF 页数:2 大小:40.45KB
下载 相关 举报
FORD WSS-M1H941-A-2015 FABRIC TANGO PATTERN KNIT DOOR INSERT  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第1页
第1页 / 共2页
FORD WSS-M1H941-A-2015 FABRIC TANGO PATTERN KNIT DOOR INSERT  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2015 12 09 N Status No replacement named D. Murtonen,NA 2003 10 10 Activated M. Dumitrescu Copyright 2015, Ford Global Technologies, Inc. Page 1 of 2 FABRIC, TANGO PATTERN, KNIT DOOR INSERT WSS-M1H941-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE

2、The material defined by this specification is a TANGO PATTERN, a 56 Gauge, Single Raschel knit, body cloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for U364 MERCURY. The fabric is fully bonded to t

3、he substrate. 3. REQUIREMENTS In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Produ

4、ction Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Wales 184.5 wales/10 cm Courses 279 courses/ 10 cm 3.2.2 Fabric Weight, +/- 5% g/m2 (FLTM BN 106-01) Laminated * Face fabric 583.5 390 * 3 mm foam thickness 3.3 COMPOSITION (ASTM D 629) Toler

5、ance as specified in WSS-M8P18-A1/A4 Fabric 84% Polyester Binder 16% Polyurethane ENGINEERING MATERIAL SPECIFICATION WSS-M1H941-A Copyright 2015, Ford Global Technologies, Inc. Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Face 73% 9.4 texf156 (SD tex Polyester) Back 27% 7.77 texf36 (SD WD Polyester) 3.5 METHOD OF DYEING Piece Dye 3.6 FINISHING OPERATIONS Knit, dye, finish, face finish, bulk, finish, face finish, coat, bulk finish, face finish, emboss

展开阅读全文
相关资源
猜你喜欢
  • DIN EN 933-1-2012 Tests for geometrical properties of aggregates - Part 1 Determination of particle size distribution - Sieving method German version EN 933-1 2012《集料的几何性能的试验 第1部分 .pdf DIN EN 933-1-2012 Tests for geometrical properties of aggregates - Part 1 Determination of particle size distribution - Sieving method German version EN 933-1 2012《集料的几何性能的试验 第1部分 .pdf
  • DIN EN 933-10-2009 Tests for geometrical properties of aggregates - Part 10 Assessment of fines - Grading of filler aggregates (air jet sieving) English version of DIN EN 933-10 20.pdf DIN EN 933-10-2009 Tests for geometrical properties of aggregates - Part 10 Assessment of fines - Grading of filler aggregates (air jet sieving) English version of DIN EN 933-10 20.pdf
  • DIN EN 933-11-2011 Tests for geometrical properties of aggregates - Part 11 Classification test for the constituents of coarse recycled aggregate German version EN 933-11 2009 + AC.pdf DIN EN 933-11-2011 Tests for geometrical properties of aggregates - Part 11 Classification test for the constituents of coarse recycled aggregate German version EN 933-11 2009 + AC.pdf
  • DIN EN 933-2-1996 Test for geometrical properties of aggregates - Part 2 Determination of particle size distribution test sieves nominal size of apertures German version EN 933-2 1.pdf DIN EN 933-2-1996 Test for geometrical properties of aggregates - Part 2 Determination of particle size distribution test sieves nominal size of apertures German version EN 933-2 1.pdf
  • DIN EN 933-3-2012 Tests for geometrical properties of aggregates - Part 3 Determination of particle shape - Flakiness index German version EN 933-3 2012《集料几何特性的试验 第3部分 颗粒形状的测定 片状指数.pdf DIN EN 933-3-2012 Tests for geometrical properties of aggregates - Part 3 Determination of particle shape - Flakiness index German version EN 933-3 2012《集料几何特性的试验 第3部分 颗粒形状的测定 片状指数.pdf
  • DIN EN 933-4-2015 Tests for geometrical properties of aggregates - Part 4 Determination of particle shape - Shape index German version EN 933-4 2008《集料几何特性试验 第4部分 颗粒形状的测定 形状指数 德文版本.pdf DIN EN 933-4-2015 Tests for geometrical properties of aggregates - Part 4 Determination of particle shape - Shape index German version EN 933-4 2008《集料几何特性试验 第4部分 颗粒形状的测定 形状指数 德文版本.pdf
  • DIN EN 933-5-2005 Tests for geometrical properties of aggregates - Part 5 Determination of percentage of crushed and broken surfaces in coarse aggregate particles (including amendm.pdf DIN EN 933-5-2005 Tests for geometrical properties of aggregates - Part 5 Determination of percentage of crushed and broken surfaces in coarse aggregate particles (including amendm.pdf
  • DIN EN 933-6-2014 Tests for geometrical properties of aggregates - Part 6 Assessment of surface characteristics - Flow coefficient of aggregates German version EN 933-6 2014《集料几何特性.pdf DIN EN 933-6-2014 Tests for geometrical properties of aggregates - Part 6 Assessment of surface characteristics - Flow coefficient of aggregates German version EN 933-6 2014《集料几何特性.pdf
  • DIN EN 933-7-1998 Tests for geometrical properties of aggregates - Part 7 Determination of shell content percentage of shells in coarse aggregates German version EN 933-7 1998《岩石粒度.pdf DIN EN 933-7-1998 Tests for geometrical properties of aggregates - Part 7 Determination of shell content percentage of shells in coarse aggregates German version EN 933-7 1998《岩石粒度.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1