1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2015 12 09 N Status No replacement named D. Murtonen, NA 2006 05 22 Activated M. Dumitrescu Copyright 2015, Ford Global Technologies, LLC Page 1 of 2 FABRIC, ALEXIS PATTERN, PILE KNITTED WSS-M1H950-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The
2、 material defined by this specification is a 4 bar 28 gauge warp knitted, simulated velour, and etching to design the pattern, polyester bodycloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an interior trim fabric, seat ins
3、ert for D258 2004 Model Year. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCT
4、ION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Wales 137 wales/10 cm Courses 225 courses/10 cm 3.2.2 Fabric Weight, range 393
5、 435 g/m2 (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H950-A Copyright 2015, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Face (A) 7.7texf36 (polyester, semi-dull, round) (B) 7.7texf48 (polyester, dull
6、) Middle 7.7texf36 (polyester, semi-dull, round) Back 7.7tex f36 (polyester, semi-dull, round) 3.5 METHOD OF DYEING Piece dyed 3.6 FINISHING OPERATIONS As Approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
