1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2004 09 09 Activated N. J. Komatsu Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 1 of 2 FABRIC, DITTO PATTERN, DOBBY WOVEN, WSS-M1H970-A UNLAMINATED 1. SCOPE The material defined by this specification is a
2、dobby woven polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for C307 Russia 2005 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as
3、 applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 136 ends/10 cm Weft 154
4、 picks/10 cm 3.2.2 Fabric Weight, +/- 15% tolerance 250 g/m2(FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 800 dtex f210 (polyester air texturized, round, semi-dull) Weft 800 dtex f210 (polyester semi- dull, round, air texturized) Weft 85
5、0 dtex f280 (air texturized, semi-dull, round) ENGINEERING MATERIAL SPECIFICATIONWSS-M1H970-A Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Package dyed or as approved by Materials Engineering 3.6 FINISHING OPERATIONS As approved by Ma
6、terials Engineering 3.7 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a fully bonded composite. 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
