1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 12 09 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE 2006 07 19 Activated N. J. Komatsu Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, TURNER DESIGN, PILE KNITTED, WSS-M1H97
2、3-A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a pile tricot warp knitted 28 gauge polyester face fabric. 2. APPLICATION This specification was released originally for material used for as an interior trim fabric for 2003 B226. 3. REQUIREMENTS Ma
3、terial specification requirements are to be used for initial qualification of materials. In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part produc
4、ers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3887) Wales 110 wales/10 cm Courses 303 courses/10 cm 3.2.2 Fabric Weight, +/- 15% tolerance 290 g/m2(FLTM BN 106-01) 3.3 COMPOSITIO
5、N (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Ground 166 dtex f36 (polyester, texturized, round, semi-dull) Pile 89 dtex f34 (polyester, texturized, round, semi-dull) ENGINEERING MATERIAL SPECIFICATIONWSS-M1H973-A Printed copies are uncontrolled Copyright 2008, Ford Global
6、 Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.6 FINISHING OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
