1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 12 16 N-STATUS Replaced by WSS-M1H1005-A V. Demarchi, FSAO 2005 01 21 Activated L. Neves Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, LUGANO DARK FLINT PATTERN, WARP KNITTED, UNLAMINATE
2、D WSS-M1H979-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a warp knitted polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2005 Model Year. 3. REQUIREMENTS In addition to the requirem
3、ents listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRU
4、CTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Wales 130 wales/10 cm Courses 230 courses/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance 240 g/m (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Pile 70 dtex f36, Semi-Dull, Round, Texture
5、d Polyester Back 70 dtex f36, Semi Dull, Round, Flat Polyester 3.5 METHOD OF DYEING Piece Dyed ENGINEERING MATERIAL SPECIFICATIONWSS-M3H979-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.6 FINISHING OPERATIONS Knit, Dye, Raise, Heat Set 3.7 FLAMMABILITY
6、 (ISO 3795/SAE J369) Burn Rate, max 100 mm/min. Note: Not required on face fabric when used as a fully bonded composite. 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
