1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 12 16 N-STATUS Replaced by WSS-M1H1007-A V. Demarchi, FSAO 2005 04 08 Revised The title was revised to read Majesty l Pattern L. Neves 2005 01 21 Activated L. Neves Printed copies are uncontrolled Copyright 2008, Ford Global Technologies,
2、 LLC Page 1 of 2 FABRIC, MAJESTIC I PATTERN, WOVEN JACQUARD, UNLAMINATED WSS-M1H981-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interio
3、r trim fabric for 2005 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Stand
4、ard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 240 yarn/10 cm Weft 200 yarn/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance 285.0 g/m (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester 3.4 YAR
5、N CONSTRUCTION (ASTM D 1244) Warp 500 dtex f144, Semi-Dull, Round, Textured Polyester Weft (A) 800 dtex f182, Semi-Dull, Round, Textured Polyester (B) 600 dtex f158, Semi-Dull, (Round, Textured Polyester ENGINEERING MATERIAL SPECIFICATIONWSS-M1H981-A Printed copies are uncontrolled Copyright 2008, F
6、ord Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Warp Solution dyed Weft Yarn dyed 3.6 FINISHING OPERATIONS Weave, Heat Set 3.7 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a fully bonded composite. 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
