1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2005 01 21 Activated L. Neves Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 1 of 2 FABRIC, UP DATA PATTERN, WOVEN JACQUARD, UNLAMINATED WSS-M1H983-A 1. SCOPE The material defined by this specification is a
2、woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2005 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicab
3、le. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 230 yarn/10 cm Weft 320 yarn/10
4、cm 3.2.2 Fabric Weight, +/- 10% tolerance 375.0 g/m (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 500 dtex f122, Semi-Dull, Round, Textured Polyester ENGINEERING MATERIAL SPECIFICATIONWSS-M1H983-A Printed copies are uncontrolled Copyrigh
5、t 2005, Ford Global Technologies, LLC Page 2 of 2 Weft (A) 800 dtex f182, Semi-Dull, Round, Textured Polyester (B) 600 dtex f158, Semi-Dull, Round, Textured Polyester (C) 500 dtex f122, Semi-Dull, Round, Textured Polyester 3.5 METHOD OF DYEING Warp Yarn dyed Weft Yarn dyed 3.6 FINISHING OPERATIONS W
6、eave, Heat Set 3.7 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a fully bonded composite. 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
