1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 11 11 N-STATUS No known use. No replacement named D. DiGregorio, NA 2004 06 15 Revised Para 3.0 inserted; para 3.1, 3.6 Report values - “NiL“ or Trace“ are not permissible S _ _ _ _ _ P _ _ _ _ _ Zn _ _ _ _ _ Ba _ _ _ _ _ Ca _ _ _ _ _ Mg
2、_ _ _ _ _ Na _ _ _ _ _ N _ _ _ _ _ B _ _ _ _ _ Cu _ _ _ _ _ Cl _ _ _ _ _ Sulfated Ash _ _ _ _ _ V. Tests Conducted _ _ _ _ _ Comments: _ _ _ _ _ Signature_ Title_ ENGINEERING MATERIAL SPECIFICATIONWSS-M2C923-A2 Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 9 of 1
3、0 Supplement A Page 6 of 6 Oil Company_ Date_ Product Name_ Product Code_ Specification Test Mfg. Physical/Chemical Properties Requirements Results Limits Viscosity at 150 C (ASTM D 445), mm2/s _ _ Viscosity at 100 C (ASTM D 445), mm2/s 12.5-.001%) _ _ Phosphorus, % _ _ Signature_ Title_ ENGINEERING
4、 MATERIAL SPECIFICATIONWSS-M2C923-A2 Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 10 of 10 Supplement B Page 1 of 1 Oil Company_ Date_ Product Name_ Blend Location _ Product Code_ Approved Physical/Chemical Properties Limits Frequency Viscosity at 150 C (ASTM D
5、445), mm2/s _ _ Viscosity at 100 C (ASTM D 445), mm2/s _ _ Viscosity at 40 C (ASTM D 445), mm2/s _ _ Density (ASTM D 1298), kg/L _ _ Viscosity at -25 C (ASTM D 5293), mPa.s _ _ Viscosity at -30 C (ASTM D 5293), mPa.s _ _ Low Temp. Pumping Viscosity at -25 C, mPa.s _ _ (ASTM D 4684) at -30 C, mPa.s _
6、 _ Pour Point (ASTM D 97), C _ _ Stable Pour Point (SAE J300 Appendix B), C _ _ Gelation Index (ASTM D 5133) _ _ Flash Point (ASTM D 93), C _ _ Volatility Evap. Loss, 1 h at 250 C (ASTM D 5800), % _ _ Dist. by GC at 371 C (ASTM D 5480), % _ _ Shear Stability (ASTM D 445), mm2/s at 100 C After ASTM D
7、 3945 or CEC L-14-A-93 _ _ After 10 h in “L-38“ Test _ _ Viscosity at 150 C and 106s-1 (ASTM D 4683 or CEC L-36-A-97), mPa.s New Oil _ _ After ASTM D 3945 or CEC L-14-A-88 _ _ Copper Corrosion (ASTM D 130,3 h at 100 C) _ _ Filterability (FLTM BJ 124-01), % _ _ Foaming (D 892) without Option A Sequen
8、ce I, mL _ _ Sequence II, mL _ _ Sequence III, mL _ _ High Temperature Foaming (D6082), mL _ _ TEOST Test (Method 33), mg _ _ Total Acid Number (ASTM D 664), mg KOH/g _ _ Total Base Number (ASTM D 2896), mg KOH/g _ _ Sulfated Ash (ASTM D 874), % _ _ Barium, % _ _ Nitrogen, % _ _ Boron, % _ _ Potassium, % _ _ Calcium, % _ _ Sodium, % _ _ Chlorine, % _ _ Sulfur, % _ _ Copper, % _ _ Zinc, % _ _ Magnesium, % _ _ Other (.001%) _ _ Phosphorus, % _ _ Signature_ Quality Control Certification Title_ Materials Engineering Concurrence_
