FORD WSS-M3B79-A-2007 PHOSPHATE SOLUTION ZINC START UP TO BE USED WITH FORD WSS-M99P1111-A 《锌活化用磷酸盐溶液 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:fuellot230 文档编号:753211 上传时间:2019-01-14 格式:PDF 页数:2 大小:18.81KB
下载 相关 举报
FORD WSS-M3B79-A-2007 PHOSPHATE SOLUTION ZINC START UP  TO BE USED WITH FORD WSS-M99P1111-A  《锌活化用磷酸盐溶液  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共2页
FORD WSS-M3B79-A-2007 PHOSPHATE SOLUTION ZINC START UP  TO BE USED WITH FORD WSS-M99P1111-A  《锌活化用磷酸盐溶液  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2007 08 10 Activated L. Rodrigues/C. Goncalves Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 1 of 2 PHOSPHATE SOLUTION, ZINC START UP WSS-M3B79-A 1. SCOPE The material defined by this specification is an aq

2、ueous solution containing essentially zinc phosphate. 2. APPLICATION This specification was released originally for material used as make-up material in full dip phosphate equipments. This material is used in combination with WSS-M3B80-A Phosphate Solution, Zinc, Make Up, WSS-M3B74-A Phosphate Solut

3、ion, Zinc, Activator, SM-5B4509-A or WSS-M3B76-A Phosphate Solution, Zinc, Accelerator. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to

4、the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 CHEMICAL COMPOSITION (atomic absorption determination) Zinc as Zn 2.5 +/- 0.4% Nickel as Ni 2.2 +/- 0.4% Manganese as Mn 2.5 +/- 0.4% 3.3 ACIDITY Free (Sodium hydroxide 0.1N) Indicator: Bromo Phenol Blue 8.0 +/- 0.5 mL

5、 Total (Sodium hydroxide 0.1N) Indicator: Phenolphthalein 36 +/- 3 mL 3.4 DENSITY (20 C) 1.49 +/- 0.04 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. ENGINEERING MATERIAL SPECIFICATIONWSS-M3B79-A Prin

6、ted copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 2 of 2 4.1 The phosphate system released by this specification consists of the following materials: 4.1.1 Cleaner, body sheet metal, multi-component, builder, liquid- WSS-M5B409-A3 4.1.2 Cleaner, body sheet metal, multi-c

7、omponent, surfactant, LIQUID - WSS-M5B409-A4 4.1.3 Phosphate Solution, Zinc, Activating Agent- WSS-M3B74-A 4.1.4 Phosphate Solution, Zinc, Make Up- WSS-M3B80-A 4.1.5 Neutralizing Agent- SM-5B4508-A 4.1.6 Phosphate Solution, Zinc- SM-5B4509-A or WSS-M3B76-A 4.1.7 Phosphate Solution, Zinc, Make-Up Man

8、ganese - WSS-M3B72-A1 and WSS-M3B72-A2 4.1.8 Phosphate Solution, Zinc, Make-Up Manganese - WSS-M3B72-A3 4.1.9 Phosphate solution, zinc, accelerator- ESK-M5B354-A 4.1.10 Phosphate Solution, Zinc, Accelerator Additive- - ESK-M5B353-A 4.1.11 Phosphate Solution, Zinc, Inorganic, Chrome-Free, Passivating Solution - WSS-M5B405-A

展开阅读全文
相关资源
猜你喜欢
  • BS 3962-1-1980 Methods of test for finishes for wooden furniture - Assessment of low angle glare by measurement of specular gloss at 85 《木制家具漆面的试验方法 用85角的镜面光泽测量做低角度眩光的评定》.pdf BS 3962-1-1980 Methods of test for finishes for wooden furniture - Assessment of low angle glare by measurement of specular gloss at 85 《木制家具漆面的试验方法 用85角的镜面光泽测量做低角度眩光的评定》.pdf
  • BS 3962-5-1980 Methods of test for finishes for wooden furniture - Assessment of surface resistance to cold oils and fats《木制家具精整试验方法 第5部分 表面耐冷凝油和脂肪性评定》.pdf BS 3962-5-1980 Methods of test for finishes for wooden furniture - Assessment of surface resistance to cold oils and fats《木制家具精整试验方法 第5部分 表面耐冷凝油和脂肪性评定》.pdf
  • BS 3962-6-1980 Methods of test for finishes for wooden furniture - Assessment of resistance to mechanical damage《木制家具漆面试验方法 耐机械损伤性评定》.pdf BS 3962-6-1980 Methods of test for finishes for wooden furniture - Assessment of resistance to mechanical damage《木制家具漆面试验方法 耐机械损伤性评定》.pdf
  • BS 3969-1998+A1-2013 Recommendations for turf for general purposes《通用草皮推荐性操作规程》.pdf BS 3969-1998+A1-2013 Recommendations for turf for general purposes《通用草皮推荐性操作规程》.pdf
  • BS 3970-1-1990 Sterilizing and disinfecting equipment for medical products - Specification for general requirements《医疗制品用灭菌消毒设备 第1部分 一般要求规范》.pdf BS 3970-1-1990 Sterilizing and disinfecting equipment for medical products - Specification for general requirements《医疗制品用灭菌消毒设备 第1部分 一般要求规范》.pdf
  • BS 3970-2-1991 Sterilizing and disinfecting equipment for medical products - Specification for steam sterilizers for aqueous fluids in sealed rigid containers《医疗制品灭菌消毒设备 第2部分 含水液体密.pdf BS 3970-2-1991 Sterilizing and disinfecting equipment for medical products - Specification for steam sterilizers for aqueous fluids in sealed rigid containers《医疗制品灭菌消毒设备 第2部分 含水液体密.pdf
  • BS 3970-5-1990 Sterilizing and disinfecting equipment for medical products - Specification for low temperature steam disinfectors《医疗制品灭菌消毒设备 第5部分 低温蒸汽消毒器规范》.pdf BS 3970-5-1990 Sterilizing and disinfecting equipment for medical products - Specification for low temperature steam disinfectors《医疗制品灭菌消毒设备 第5部分 低温蒸汽消毒器规范》.pdf
  • BS 3984-1982 Specification for sodium silicates《硅酸钠规范》.pdf BS 3984-1982 Specification for sodium silicates《硅酸钠规范》.pdf
  • BS 3985-2003 Haemiglobincyanide (cyanmethaemoglobin) preparation as a standard for spectrometric haemoglobinometry《血红蛋白光谱测定用氰化正铁血红蛋白制备标准》.pdf BS 3985-2003 Haemiglobincyanide (cyanmethaemoglobin) preparation as a standard for spectrometric haemoglobinometry《血红蛋白光谱测定用氰化正铁血红蛋白制备标准》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1