FORD WSS-M3H200-A1-2017 CARPET 200 PATTERN POLYESTER POLYPROPYLENE NON WOVEN RANDOM VELOUR NEEDLED LATEX PRE COAT 1000 g m2 (29 5 oz) TO BE USED WITH FORD WSS-M99P1111-A .pdf

上传人:proposalcash356 文档编号:753382 上传时间:2019-01-14 格式:PDF 页数:4 大小:54.16KB
下载 相关 举报
FORD WSS-M3H200-A1-2017 CARPET 200 PATTERN POLYESTER POLYPROPYLENE NON WOVEN RANDOM VELOUR NEEDLED LATEX PRE COAT 1000 g m2 (29 5 oz)  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第1页
第1页 / 共4页
FORD WSS-M3H200-A1-2017 CARPET 200 PATTERN POLYESTER POLYPROPYLENE NON WOVEN RANDOM VELOUR NEEDLED LATEX PRE COAT 1000 g m2 (29 5 oz)  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第2页
第2页 / 共4页
FORD WSS-M3H200-A1-2017 CARPET 200 PATTERN POLYESTER POLYPROPYLENE NON WOVEN RANDOM VELOUR NEEDLED LATEX PRE COAT 1000 g m2 (29 5 oz)  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第3页
第3页 / 共4页
FORD WSS-M3H200-A1-2017 CARPET 200 PATTERN POLYESTER POLYPROPYLENE NON WOVEN RANDOM VELOUR NEEDLED LATEX PRE COAT 1000 g m2 (29 5 oz)  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 00 2017 10 04 Released A. Wilson, EU Controlled document at www.MATS Copyright 2017, Ford Global Technologies, Inc. Page 1 of 4 CARPET, 200 PATTERN, POLYESTER/POLYPROPYLENE, NON WOVEN, WSS-M3H200-A1 RANDOM VELOUR, NEEDLED, LATEX PRE COAT

2、1000 g/m2 (29.5 oz) CARPET, 200 PATTERN, POLYESTER/POLYPROPYLENE, NON WOVEN, WSS-M3H200-A2 RANDOM VELOUR, NEEDLED, LATEX PRE COAT 250 g/m2 (7.4 oz) 1. SCOPE The materials defined by these specifications are random velour, needled, nonwoven carpets of good quality and uniform composition. The carpet

3、face is made with 100 virgin fiber. 2. APPLICATION WSS-M3H200-A1 was released originally for Transit Custom MY2018 floor carpet in Europe. WSS-M3H200-A2 was released originally for Transit Custom MY2018 seating leg hider in Europe. 3. REQUIREMENTS 3.1 APPROVED SOURCES This specification requires the

4、 use of approved sources. Only the sources identified on the Ford Approved Source List (ASL) can be used when this specification is listed on the drawing, CAD file, or other documents. The list of approved sources is located within Ford at or available externally through a Ford Materials Engineer.

5、3.2 CONDITIONING AND TEST CONDITIONS All test values are based on material conditioned for not less than 24 h prior to testing in a controlled environment of 23 +/- 2 C and 50 +/- 5% relative humidity. Testing of the material should occur in the conditioning environment or soon after removal. 3.3 PE

6、RFORMANCE CRITERIA 3.3.1 In addition to the requirements listed herein, the end-item floor carpet shall be tested to WSS-M8P16-B and any additional SDS requirements. The details for each of the suppliers specific construction shall be documented in the supplement attached and uploaded into the data

7、package. 3.4 SAMPLE SELECTION All evaluations shall be conducted on test specimens taken from finished roll goods prior to any subsequent operations, such as reheating or molding. ENGINEERING MATERIAL SPECIFICATION WSS-M3H200-A1/A2 Copyright 2017, Ford Global Technologies, Inc. Page 2 of 4 3.5 APPEA

8、RANCE The color, pattern, and gloss shall match the approved Corporate Design master sample. 3.6 COMPOSITION 3.6.1 Face Fiber 70% Polyester (ASTM D276) 30% Polypropylene 3.6.2 Pre Coat SBR-Latex (ASTM D279) 3.7 METHOD OF DYEING Solution dyed 3.8 CONSTRUCTION 3.8.1 Face Fiber (60%) 12 denier PES (AST

9、M D 1244) (10%) 4 denier PES (30%) 30 denier PP 3.9 THICKNESS (ISO 1765) 3.9.1 A1 6.5 +/- 1.0 mm 3.9.2 A2 3.6 +/- 1.0 mm 3.10 WEIGHT (ASTM D5848) 3.10.1 Face Fiber A1 900 - 1100 g/m2 (26.5 32.4) oz A2 225 - 275 g/m2 (6.6 8.1) oz 3.10.2 Pre Coat A1 270 - 330 g/m2 (8 9.7) oz A2 90- 110 g/m2 (2.7 3.2)

10、oz 4. GENERAL INFORMATION This information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 DRAWING CALL OUT ENGINEERING MATERIAL SPECIFICATION WSS-M3H200-A1/A2 Copyr

11、ight 2017, Ford Global Technologies, Inc. Page 3 of 4 The following shall be called out on the Engineering drawing to correctly designate the approved material. WSS-M3H200-A1/A2 Supplier Name and Product Code (As it appears on the Approved Source Listing) WSS-M8P16-B 4.2 APPROVAL OF MATERIALS Suppli

12、ers desiring approval of their materials shall first obtain an expression of interest from Purchasing, Design or Product Development, and Materials Engineering. The supplier shall submit a completed copy of their laboratory test reports, signed by a qualified and authorized representative of the tes

13、t facility, demonstrating full compliance with all the requirements of the Material Specification. Tested material samples must be available for review upon request and kept for a minimum of one year. Upon request, the supplier will review the associated quality control documents (Process Failure Mo

14、de and Effects Analysis, Control Plans, Certification testing) with Ford. 4.3 SUPPLIERS ONGOING RESPONSIBILITY All materials must be equivalent in all characteristics to the material upon which approval was originally granted. Prior to making any changes to the material originally approved, whether

15、or not such changes affect the materials ability to meet the specification requirements, the supplier shall notify the affected Supplier Technical Assistance (STA), Purchasing, and Materials Engineering activities of the proposed changes (with reasons) by submission of a completed Suppliers Request

16、for Engineering Approval, SREA. For parts and components using Ford Engineering Material Specifications, all samples tested to the specifications for Design Verification (DV), Production Verification (PV) and Production Part Approval Process (PPAP) sign off must be kept until Job 1. 4.4 RESTRICTED S

17、UBSTANCE MANAGEMENT STANDARD Substance restrictions imposed by regulations or Company direction applies to the materials addressed by this document. The restrictions are identified in the Restricted Substance Management Standard WSS-M99P9999-A1 which is updated yearly. It is the suppliers responsibi

18、lity to comply with this standard on a continuing basis through IMDS and or GMAP reporting. 5. SUMMARY OF REVISIONS ENGINEERING MATERIAL SPECIFICATION WSS-M3H200-A1/A2 Copyright 2017, Ford Global Technologies, Inc. Page 4 of 4 Non Woven Carpet Construction Supplement Supplier _Supplier Contact Name_

19、 Number _ Product/ Style Name _ Material Specification _ Performance Specification _ Supplier Product Code _ Manufacturing Location _ Supplier Lab Number _ Supplier Lab Date _ Composition Type Supplier Face Fiber ASTM D276 _ _ Minimum Recycled Content _ % PIR _ % PCR Pre Coating ASTM D276 _ _ Primar

20、y Backing ASTM D276 _ _ Secondary Backing ASTM D276 _ _ Construction Solution or piece dyed (circle one) Denier (s) _ Face Fiber Thickness ISO 1765 _+/- _ mm Pre Coating Thickness ISO 1765 _+/- _ mm Primary Backing Thickness ISO 1765 _+/- _ mm Secondary Backing Thickness ISO 1765 _+/- _ mm Mass per Unit Area Weight Face Fiber ASTM D5848 _+/- _ g/m2 Pre Coating ASTM D5848 _+/- _ g/m2 Primary Backing ASTM D5848 _+/- _ g/m2 Secondary Backing ASTM D5848 _+/- _ g/m2 Materials Engineering Signature _Date _ Comments _ Rolled Goods _ Molded Product _

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1