1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 01 2016 07 05 N Status Replaced by WSS-M4C135-B1 L. Benvenutti, EU 2010 03 11 Activated L. Benvenutti Copyright 2016, Ford Global Technologies, LLC Page 1 of 4 FUEL, 95 RON, UNLEADED, INITIAL FILL, VENEZUELA WSS-M4C135-A NOT TO BE USED FO
2、R NEW DESIGN 1. SCOPE The material defined by this specification is a well-refined gasoline and normal commercial additives. 2. APPLICATION This specification was released originally for material used as initial fill fuel for vehicles designed to operate on gasoline in Venezuela. Additives are prese
3、nt to protect the fuel system. This material is not specifically intended for use in certification testing, mileage accumulation or general fueling. 3. REQUIREMENTS This material must be produced using current refinery practices for market place fuels and must meet all pertinent legal gasoline requi
4、rements in Venezuela. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 OCTANE NUMBERS 3.2.1 Research, min 95.0 (ISO 5164 / ASTM D 2699) 3.2.2 Anti Knock Index, mi
5、n 91.0 (ISO 5163 / ASTM D 2700) 3.3 TOTAL SULFUR, max 600 mg/kg (ISO 14596 / 8754 / ASTM D 4294 / 5453 / 1266) 3.4 METAL CONTENT 3.4.1 Lead, max 0.0130 g/L (ASTM D 3237) 3.4.2 Phosphorus, max 0.0010 g/L (ASTM D 3231) 3.4.3 Manganese, max 0.0010 g/L (ASTM D 3831) ENGINEERING MATERIAL SPECIFICATION WS
6、S-M4C135-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 4 3.5 COMPOSITION 3.5.1 Hydrocarbons, max % volume (ASTM D 1319 / 5769 / DIN 51 791) Aromatics 35 Olefins + Aromatics 45 Saturates Report 3.5.2 Gum Content, max (ISO 6246 / ASTM D 381) Washed 5 mg/100 mL Unwashed Report 3.5.3 Benzene
7、 max 1.2% vol (ASTM D 3606 / 5769 / EN 12177 / EN 238) 3.5.4 Total Oxygen, max 3.7% mass 3.6 DISTILLATION RANGE, max (ASTM D 86-9 / 3710) Volume Evaporated Temperature Initial boiling point Report 10% 70 C 50% 77 121 C 90% 195 C Final boiling point 225 C Residue, max 2% volume 3.7 VAPOR PRESSURE 3.
8、7.1 Seasonal Geographical Volatility Shall meet the local appropriate specifications. 3.8 OXIDATION STABILITY, MIN 240 minutes (ISO 7536 / ASTM D 525) 3.9 CORROSION PROTECTION 3.9.1 Copper Tarnish, min 1 (ISO 2160 / ASTM D 130, 3 h at 50 C) 3.10 ODOR The material shall have the usual characteristic
9、odor of gasoline. There shall be no obvious foreign odors. 3.11 APEARANCE (Visual inspection / ASTM D 4176) Pink or Orange bright, no free water or particulates ENGINEERING MATERIAL SPECIFICATION WSS-M4C135-A Copyright 2016, Ford Global Technologies, LLC Page 3 of 4 3.12 ADDITIVES Fuels shall contai
10、n normal commercial additives at concentrations representative of good commercial practice in the receiving locale (unless otherwise specified). Metallic additives, including lead, manganese and phosphorus are not allowed. 3.13 CERTIFICATION Supplier shall certify that the gasoline is a formula that
11、 has been tested and meets Ford Motor Company requirements as stated in these specifications. Technical evidence of these data and manufacturing limits must be tabulated on the attached form. This certification shall be by the suppliers director of research or other authorized official and submitted
12、 to the responsible Ford purchasing activity. This information will then be forwarded to the Materials Activity of the Engine Product Engineering Office or to the product engineering office responsible for source approval. 4. GENERAL INFORMATION The information given below is provided for clarificat
13、ion and assistance in meeting the requirements of this specification. 4.1 FLAMMABILITY This material represents a potential fire hazard. The Manufacturing Engineering Department or other responsible activity shall notify both the Security and Safety Units of its presence to assure that proper fire p
14、recautions are provided. The location in which it is used or stored shall be included in the notifications. 4.2 SAMPLING AND SUBMISSION OF SAMPLES (ISO 3170 / 3171, ASTM D 4057 / D 4177) Quality control records must be made available to Fuels and Lubricants Engineering upon request. ENGINEERING MATE
15、RIAL SPECIFICATION WSS-M4C135-A Copyright 2016, Ford Global Technologies, LLC Page 4 of 4 Company _ Terminal _ Volatility Grade _ Specification _ Date _ Inspection Results Specification Typical Manufacturing Limits Appearance Clean and free of Impurities _ _ Research Octane Number 95.0 min _ _ Anti
16、Knock Index 91.0 min _ _ Lead, g/L 0.0130 max _ _ Manganese, g/L as MMT 0.0010 max _ _ Phosphorus, g/L 0.0010 max _ _ Total Sulfur, mg/kg 600 max _ _ Copper Corrosion, 3h at 50 C 1 max _ _ Oxidation Stability.100 C 240 min _ _ Vapor Pressure, kPa Report _ _ Specific gravity at 20 C Report _ _ Distil
17、lation Range Initial Boiling Point, C 30 min _ _ 10% Evaporated, C 70 C max _ _ 50% Evaporated, C 77 - 121 C _ _ 90% Evaporated, C 195 C max _ _ Final Boiling Point, C 225 C max _ _ Residue, % vol 2 max _ _ Hydrocarbons, % vol Aromatics 35 max, _ _ Olefins + Aromatics 45 _ _ Saturates Report _ _ Benzene, % vol 1.2 max _ _ Gum, mg/100 ml washed 5 _ _ Gum, mg/100 ml unwashed Report _ _ Water and Sediments, % mass 0.01 max _ _ Additives Type & Formula Manufacturing Limits Anti-oxidant _ _ Anti-corrosion _ _ Detergent _ _ Metal Deactivator _ _ Miscellaneous _ _ Signature_ Title_
