1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 0 2015 06 19 Released A. Wagenhals, NA Controlled document at www.MATS Copyright 2015, Ford Global Technologies, LLC Page 1 of 2 FABRIC, MOONROOF /SUNROOF ROLLERSHADE WSS-M5H34-B1 0% LIGHT TRANSMITTANCE 1. SCOPE The material defined by t
2、his specification is made of two polyester fabrics laminated with an adhesive. 2. APPLICATION This specification is released for the retractable sunshade material used to reduce the light penetrating the glass of a panoramic roof. 3. REQUIREMENTS In addition to the requirements listed herein, this m
3、aterial shall meet the SDS requirements of Manual sunshade as applicable. When used on the intended application, the material must be capable of performing satisfactory under all production and service conditions. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS 3.1.1 Materials manufactured to thi
4、s Specification shall also meet the requirements contained in WSS-M8P27-A1/latest. 3.1.2 Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials WSS-M99P1111-A/latest. 3.1.3 Materials used in interior applications must meet the requirements o
5、utlined in WSSM99P2222-D1/latest. 3.2 APPEARANCE The color, pattern, finish and hand shall match the approved Corporate Design master sample 3.3 WEIGHT (FLTM BN 106-01) Composite Total Weight 300 +/- 10% g/m2 3.4 THICKNESS Specified on the Engineering Drawing (ASTM D1777) 3.5 COMPOSITION (ASTM D276
6、/ ASTM D629) Fabrics 100% Polyester Intermediate Layer Polyurethane Films Adhesive Co-Polyester ENGINEERING MATERIAL SPECIFICATION WSS-M5H34-B1 Copyright 2015, Ford Global Technologies, LLC Page 2 of 2 3.6 STRENGTH PROPERTIES 3.6.1 Breaking Strength (ASTM D 5034, grab method, 300 mm/min speed Averag
7、e of 5 samples in each direction) MD 500 N min AMD 500 N min 3.6.2 Breaking Strength Retention after Resistance to Interior Weathering (FLTM BO 116-01, 977.6 kJ/m2) 3.6.2.1 Retained Breaking Strength (ASTM D5034 Grab Method, 300 mm/min speed Average of 5 samples in each direction) MD 250 N min AMD 250 N min 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 5. SUMMARY OF REVISIONS
