1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2004 10 28 Activated C. Bezant Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 1 of 2 ANTI-SQUEAK TAPE WSS-M6G18-A 1. SCOPE The material defined by this specification is a felt product with an acrylic based a
2、dhesive tape. 2. APPLICATION This specification was released initially for anti-squeak tapes for use behind wood veneer assemblies. The materials involved are felt: cotton/viscose/polyester blend, and double-sided adhesive tape, adhesive, modified acrylic, carrier, tissue. 3. REQUIREMENTS 3.1 STANDA
3、RD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 MATERIAL PROPERTIES 3.2.1 Color Felt Black 3.2.2 Thickness Felt 0.35 - 0.5mm Adhesive plus carrier 0.115mm 3.2.3 Weight Fel
4、t 50g/m23.2.4 Tensile Strength Dry Felt 80N/5cm 3.2.5 Adhesive Tape Service temperature range -20 to +150 C Shelf life 1 Year Release from liner 10N/m Max Tack Open 1200N/m Tack Closed 1200N/m Peel Adhesion Open 1000N/m Peel Adhesion Closed 1000N/m ENGINEERING MATERIAL SPECIFICATIONWSS-M6G18-A Print
5、ed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 2 of 2 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 STORAGE Felt material should be stored in clean/dry conditions off floor level in sealed polyethylene bags. Mildew could occur if felts are stored in humid/damp conditions.
