1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions Rev 02 2012 07 17 N Status Replaced by ESE-M99B144-B K. Cosgrave, EU 2002 08 20 Revised Updated and renumbered 1997 12 17 Activated B. Hennessey Controlled document at www.MATS Page 1 of 2 Copyright 2012, Fo
2、rd Global Technologies, Inc. SURFACTANT, LUBRICANT, RUBBER HOSE AND TUBING WSS-M99B144-C NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a long chain alcohol-ethylene oxide condensate surfactant and a polymer-bound colorant (if required). 2. APPLICATION This spec
3、ification was released originally for a lubricant for rubber hose and tubing. It is used at dilutions of between 40:1 and 200:1 with water depending on the application. It may be dyed purple. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers mus
4、t conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FORM Liquid 3.3 COLOR Clear, purple or colorless 3.4 DILUTION Dilution V:V Water:Lubricant Type 1 Type 2 Type 3 40:1 100:1 200:1 3.5 SURFACE TENSION, max 27 mN/m (ASTM D 1331) 3.6 pH 5 - 8 Test Method: To
5、40 mL of tap water add 10 mL of surfactant. Determine pH. 3.7 SPECIFIC GRAVITY 0.960 - 1.015 (ASTM D 1298 at 15 C) 3.8 VISCOSITY 0.6 - 0.9 mm2/s (ASTM D 446 at 38 +/- 1 C) ENGINEERING MATERIAL SPECIFICATION WSS-M99B144-C Page 2 of 2 Copyright 2012, Ford Global Technologies, Inc. 3.9 ACTIVE INGREDIEN
6、T (Total Solids), max 50 +/- .5 % (ASTM D 460, Method A, by weight) 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 PURCHASING INFORMATION If the material is to be purchased pre-diluted with water it should be specified thus: For 40:1 dilution WSS-M99B144-C Type 1 100:1 dilution WSS-M99B144-C Type 2 200:1 dilution WSS-M99B144-C Type 3
