FORD WSS-M99P41-A20-2014 LABEL PERFORMANCE REMOVABLE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M99P41-A10).pdf
《FORD WSS-M99P41-A20-2014 LABEL PERFORMANCE REMOVABLE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M99P41-A10).pdf》由会员分享,可在线阅读,更多相关《FORD WSS-M99P41-A20-2014 LABEL PERFORMANCE REMOVABLE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M99P41-A10).pdf(17页珍藏版)》请在麦多课文档分享上搜索。
1、Date Action Revisions Rev. 03 2014 11 25 Revised See Summary of Revisions G. Eaton, FNA 2014 01 22 Revised See Summary of Revisions G. Eaton, FNA 2013 04 05 Revised See Summary of Revisions G. Eaton, FNA Controlled document at www.MATS Copyright 2014, Ford Global Technologies, LLC Page 1 of 17 ENGIN
2、EERING MATERIAL SPECIFICATION LABEL PERFORMANCE, NO ADHESIVE WSS-M99P41-A10 LABEL PERFORMANCE, SEWN IN WSS-M99P41-A11 LABEL PERFORMANCE, REMOVABLE WSS-M99P41-A20 LABEL PERFORMANCE, PSA, INTERIOR WSS-M99P41-A31 LABEL PERFORMANCE, PSA, EXTERIOR WSS-M99P41-A32 LABEL PERFORMANCE, PSA, UNDERHOOD WSS-M99P
3、41-A33 LABEL PERFORMANCE, PSA HIGH ABRASION, INTERIOR WSS-M99P41-A34 LABEL PERFORMANCE, PSA, HIGH ABRASION, EXTERIOR WSS-M99P41-A35 LABEL PERFORMANCE, PSA, SECURITY FEATURE, INTERIOR WSS-M99P41-A41 LABEL PERFORMANCE, PSA, SECURITY FEATURE, EXTERIOR WSS-M99P41-A42 LABEL PERFORMANCE, PSA, SECURITY FEA
4、TURE, UNDERHOOD WSS-M99P41-A43 LABEL PERFORMANCE, HEAT APPLIED, INTERIOR WSS-M99P41-A51 LABEL PERFORMANCE, HEAT APPLIED, EXTERIOR WSS-M99P41-A52 LABEL PERFORMANCE, HEAT APPLIED, UNDERHOOD WSS-M99P41-A53 LABEL PERFORMANCE, HEAT APPLIED, HIGH ABRASION, INTERIOR WSS-M99P41-A54 LABEL PERFORMANCE, HEAT A
5、PPLIED, HIGH ABRASION, EXTERIOR WSS-M99P41-A55 LABEL PERFORMANCE, HEAT APPLIED, VERY HIGH ABRASION WSS-M99P41-A56 LABEL PERFORMANCE, IN MOLD, POST MOLD, INTERIOR WSS-M99P41-A61 LABEL PERFORMANCE, IN MOLD, POST MOLD, EXTERIOR WSS-M99P41-A62 LABEL PERFORMANCE, IN MOLD, POST MOLD, UNDERHOOD WSS-M99P41-
6、A63 LABEL PERFORMANCE, INSTRUCTIONAL TAPES, PSA WSS-M99P41-A72 1. SCOPE These specifications define the performance requirements for all Ford Motor Company vehicle labels. The base materials and adhesive types that make up the particular label are selected by the supplier to meet the intended applic
7、ation. The information is documented in Supplement A, of this specification. 2. APPLICATION These specifications were released originally for labeling requirements of various automotive components. Applications include (but are not limited to) warning labels, bar code labels, instructional labels, a
8、nd “patches” having no printing. ENGINEERING MATERIAL SPECIFICATION WSS-M99P41-A10/A72 Copyright 2014, Ford Global Technologies, LLC Page 2 of 17 2.1 DEFINITIONS OF LABEL APPLICATION TYPES No Adhesive: Informational or instructional labels, located interior, exterior, or underhood, which are hung on
9、 the vehicle. The label must remain legible until the vehicle reaches the consumer. Sewn In: Informational or instructional labels, interior only, and sewn into a vehicle component such as a seat, seatbelt webbing, or head rest. These labels must remain intact for the life of the vehicle. Removable:
10、 Informational or instructional labels or protective films located interior, exterior or underhood. Removable labels are not intended to remain intact for the life of the vehicle. Removable labels are considered to be temporary for convenience inventory or process management. Protective films contai
11、ning no printed information are considered removable labels Removable labels are intended to be easily removed by hand and non-staining to the substrate they are applied to. The labels are hand applied at room temperature and must remain legible and in place until they are removed by the consumer or
12、 manufacturing facility. Pressure Sensitive Adhesive (PSA): Informational or instructional labels located interior, exterior or underhood. PSA labels are intended to remain legible and in position for the life of the vehicle. PSA labels are NOT approved for seatbelt webbing. Maximum bond strength is
13、 reached after 72 hours, but within 20 minutes initial strength makes them difficult to remove. The labels are hand applied in the assembly plant or at the Tier One supplier facility. PSA High Abrasion: Same as PSA but for labels located in a high abrasion environment such as the seat, carpet, or un
14、protected exterior. PSA Label Security Feature: PSA labels described above but with unique characteristics designed to show evidence that a part on a vehicle or its information has been tampered with, altered and/or counterfeit. The label security feature(s) could include, but are not limited to, UV
15、 foot print, self-destruction upon attempted removal, infra red traceable ink or adhesive or anti-counterfeit printing. The intent of the security feature is to allow field investigators the ability to authenticate genuine security labels. Heat Applied: Informational or instructional labels that are
16、 located anywhere in the vehicle. They are intended to remain legible for the life of the vehicle. There are two types of heat applied labels: 1. Heat transfer which is an ink base with a protective coating and adhesive. 2. Heat seal which is a multi-layer film consisting of a heat-activated adhesiv
17、e. The labels are applied at the Tier One supplier facility per the label supplier process instructions. Heat Applied High Abrasion: Same as heat applied but with a different construction that resists abrasion and is applied to the carpet, seat or unprotected exterior locations. Heat Applied Very Hi
18、gh Abrasion: Heat applied labels to seatbelt webbing. In Mold/Post Mold: Instructional or informational labels that are applied at the Tier One supplier facility. For in mold, the label is placed into the injection molding tool prior to molding the part. In Post mold or pad print, silkscreen paint i
19、s applied to the part. They are intended to remain legible for the life of the vehicle. Instructional Tapes: Printable PSA roll tape for identification labeling of underbody parts. The tape is not required to remain intact for the life of the vehicle but remain intact through assembly. ENGINEERING M
20、ATERIAL SPECIFICATION WSS-M99P41-A10/A72 Copyright 2014, Ford Global Technologies, LLC Page 3 of 17 2.2 APPLICATION TESTING Label test requirements depend on their type, location, and unique properties. Table 1 outlines the test requirements necessary for approval. Note: All labels located in a prot
21、ected exterior location do not require exterior weathering outlined in paragraph 3.16.2. All other exterior test requirements apply. TABLE 1 TEST REQUIREMENTS FOR SPECIFIC LABEL TYPES LABEL TYPE Property Location Suffix Tests Required No Adhesive All A10 3.1 - 3.10.2, 3.12.2.1, 3.12.4, 3.12.5.1, 3.1
22、3, 3.14, 3.16.1, 3.17.1 Sewn In Interior A11 3.1 - 3.10.2, 3.12.2.1, 3.12.4, 3.12.5.1, 3.13 - 3.15, 3.16.1, 3.17.1, 3.19 - 3.26 Removable All A20 3.1 - 3.10.2, 3.11.1, 3.12.2.1, 3.12.4, 3.12.5.1, 3.12 - 3.15, 3.16.1, 3.17.1 PSA General Interior A31 3.1 - 3.10.2, 3.11.2, 3.12.2.2, 3.12.3.1, 3.12.4, 3
23、.12.5.1, 3.13 - 3.15, 3.16.1, 3.17.1, 3.18 - 3.25 Exterior A32 3.1 - 3.10.2, 3.11.2, 3.12.2.3, 3.12.3.1, 3.12.4, 3.12.5.2, 3.16.2, 3.17.1, 3.26 - 3.28, 3.30, 3.31 Underhood A33 3.1 - 3.10.2, 3.11.2, 3.12.2.3, 3.12.3.2, 3.12.4, 3.12.5.3, 3.15, 3.17.1, 3.26, 3.27, 3.29 3.33 High Abrasion Interior A34
24、3.1 - 3.10.2, 3.11.2, 3.12.2.2, 3.12.3.1, 3.12.4, 3.12.5.1, 3.13 - 3.15, 3.16.1, 3.17.2, 3.18 - 3.25 Exterior A35 3.1 - 3.10.2, 3.11.2, 3.12.2.3, 3.12.3.1, 3.12.4, 3.12.5.2, 3.16.2, 3.17.2, 3.26 - 3.28, 3.30, 3.31 PSA Security Feature Interior A41 3.1 - 3.10.2, 3.11.3, 3.12.2.2, 3.12.3.1, 3.12.4, 3.
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
本资源只提供5页预览,全部文档请下载后查看!喜欢就下载吧,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- FORDWSSM99P41A202014LABELPERFORMANCEREMOVABLETOBEUSEDWITHFORDWSSM99P1111ASHOWNONFORDWSSM99P41A10PDF

链接地址:http://www.mydoc123.com/p-754414.html