1、 GMDAT ENGINEERING STANDARDS Material Specification Textiles SUPERCEDED EDS-M-6034 Fabric Cover-Nettle 1 This standard may be applied only for current project. 8% = !87 :,p (Nettle 1) Note: 8 E:48t G8 =97 FF7 957%P$ . Copyright 2010 General Motors Company All Rights Reserved September 2010 Originati
2、ng Department: GMDAT Engineering Standards Page 1 of 4 Version : 3 1 Introduction Note: Nothing in this standard supersedes applicable laws and regulations. Note: In the event of conflict between the Korean and English language, the Korean language shall take precedence. 1.1 Purpose. This specificat
3、ion specifies the requirements of basic property for Nettle used to determine the shape of upholstery of automobiles. 1.2 Material Description. Nettle that is hard and not slippery. 1.3 Typical Applications. Nettle used to determine the shape of car upholstery. 2 References Note: Only the latest app
4、roved standards are applicable unless otherwise specified. 2.1 External Standards/Specifications. None 2.2 GM Standards/Specifications. EDS-M-0102 EDS-T-7602 EDS-T-7611 EDS-T-7626 EDS-T-7642 EDS-T-7694 GMW3059 EDS-T-7132 EDS-T-7603 EDS-T-7624 EDS-T-7638 EDS-T-7646 GMW3001 2.3 Additional References.
5、None 1 P7 :0 : ., E:48 6&F !7$ :4-8! 9I8x $4=F 3L 6$ . :0 : F67t 7568 18 88x 7 , F6* 72T8p) F$ . 1.1 +95 . ., E:48t 8% = !888 GI18x 86x:0d 88F 17%L# 5DdE (Nettle)7 $4F7 ,p2e8x G*F E:8x 4*F#$ , +958 8$ . 1.2 8: 8-L C2e . &e&eF+ -,!x) : 6# 5DdE (Nettle). 1.3 957 -88 . GI18x 86x:0d 88F 5DdE (Nettle). 2
6、 4) E:4 / :0 : C-H +d%P 9I8 6# F 48 07 38%P E:48x 957F$ . 2.1 17 E:4 / . F$-1F 68 2.2 GM E:4 / . EDS-M-0102 EDS-T-7602 EDS-T-7611 EDS-T-7626 EDS-T-7642 EDS-T-7694 GMW3059 EDS-T-7132 EDS-T-7603 EDS-T-7624 EDS-T-7638 EDS-T-7646 GMW3001 2.3 dA E:4 / . F$-1F 68 GMDAT ENGINEERING STANDARDS EDS-M-6034 Cop
7、yright 2010 General Motors Company All Rights Reserved September 2010 Page 2 of 4 Version : 3 3 Requirements 3.1 General Properties 3 7 1F 3.1 d., ,p2e Table 1: General Properties / E 1: d., ,p2e Designations / 4G F+ Test Methods / 4G - Specifications / 3.1.1 Weight per unit area. / $88 +95$- :E( .
8、EDS-T-7611 100140 g/m2. 3.1.2 Thickness. / % . EDS-T-7624-1D 0.3 mm min. / 0.3 mm 81 . 3.1.3 Thread count. / :9 -4$ . - Warp. / - 1 . - Weft. / - 881 . EDS-T-7638-A 22 threads/cm. / 22 1 /cm. 20 threads/cm. / 20 881 /cm. 3.1.4 Composition. / 2e . - Warp. / - 1 . - Weft. / - 881 . 100 wt% Rayon stapl
9、e. / 100 wt% 891 . 100 wt% Rayon staple. / 100 wt% 891 . 3.1.5 Breaking force. / 88 I$ . - Warp. / - 1 . - Weft. / - 881 . EDS-T-7132-A 290 N/5cm min. / 290 N/5cm 81 . 440 N/5cm min. / 440 N/5cm 81 . 3.1.6 Elongation at break. / 88 48 . - Warp. / - 1 . - Weft. / - 881 . EDS-T-7132-A 10 ) 20 % 15 ) 2
10、5 % 3.1.7 Thread tear-out force. / 9E= dE 87( I$ . - Warp. / - 1 . - Weft. / - 881 . EDS-T-7642 35 N min. / 35 N 81 . 35 N min. / 35 N 81 . GMDAT ENGINEERING STANDARDS EDS-M-6034 Copyright 2010 General Motors Company All Rights Reserved September 2010 Page 3 of 4 Version : 3 Designations / 4G F+ Tes
11、t Methods / 4G - Specifications / 3.1.8 Tear strength. / 87( I$ . - Warp. / - 1 . - Weft. / - 881 . EDS-T-7646 25 N min. / 25 N 81 . 25 N min. / 25 N 81 . 3.1.9 Softness. / 8T7$2e . - Warp. / - 1 . - Weft. / - 881 . EDS-T-7626-B 8 10 cm. 10 12 cm. 3.1.10 Resistance to odour. / ?d2e . - A2. - B2. EDS
12、T-7603 Rating 5 min. / 5 = 81 . Rating 5 min. / 5 = 81 . 3.1.11 Volatility of organic constituents. / 8Td,p HL-P$ . - Reflectance. / - -L18 . EDS-T-7694 60% min. / 60% 81 . 3.1.12 Flammability. / !7$2e . - Burn rate. / - 7$2 2$ . EDS-T-7602 90mm/min max. / 90 mm/. 8F . 3.2 Additional Requirements 3
13、2.1 Samples of components or materials released to this specification shall be tested for conformity with the requirements of this specification and approved by GMDAT Technical Center prior to commencement of delivery of bulk supplies. 3.2.2 In the event of any intentional deviations from the requi
14、rements of this specification, it is the sole responsibility of the supplier to inform the purchaser of all such deviations. Furthermore the supplier shall submit unsolicited samples for reapproval by GMDAT Technical Center prior to commencement of delivery of deviant bulk supplies. 3.2.3 Unless oth
15、erwise specified, tests shall be conducted in the “as received“ condition. 3.2.4 All colors of one (or the same) quality and all threads of a design pattern shall meet the requirements specified in paragraph 3.1. 3.2 4 7 1F 3.2.1 ., E:48 957%L# 387 .,8p) 61 )= 987 9PE8 P-P0 972P F7%P 7 &d( d3T7$ 27
16、8F 4G %L 388x -O6x6 F$ . 3.2.2 ., E:472P -6!# 8$958 ,p2e-G4 .,72P -P2F 7 98958p) )=84 =y8:+ 1)7 .,8x $4 9PF7 61 P4 987 d3T7$ 27 8F 8388x -O6x6 F$ . 3.2.3 61)= P4 987 .,8 98=*7 $4F -$* 6=8 6$+ , )= -O8t 1B) 4D8x =x?F7 4G F$ . 3.2.4 % 8 DBh7 $4F 5 118 .,8t 3.1F8 ,p2e7 1F8x )B958p) +94P6 F$ GMDAT ENGIN
17、EERING STANDARDS EDS-M-6034 Copyright 2010 General Motors Company All Rights Reserved September 2010 Page 4 of 4 Version : 3 3.2.5 Appearance. The weft direction shall be perpendicular to the courses direction in principle. 3.2.6 Storability. The fabric cover shall be in such a condition that blanks
18、 cut from the materials, even after prolonged storage, still retain their dimensions and shape within the required tolerances. 3.2.7 Fabric shall not slide in the weft direction and courses direction. 3.3 Approval and Quality Assurance Procedure. All raw materials shall be approved and regularly ins
19、pected for its quality prior to and during mass production delivery according to approval and quality assurance procedure for chemical raw materials (Spec. No. EDS-M-0102) 4 Manufacturing Process Not applicable. 5 Rules and Regulations 5.1 All materials supplied to this standard must comply with the
20、 requirements of GMW3001, Rules and Regulations for Material Specifications 5.2 All parts or systems supplied to this standard must comply with the requirements of GMW3059, Restricted and Reportable Substances for Parts. 6 Approved Sources Not applicable. 7 Notes 7.1 Glossary. Not applicable. 7.2 Ac
21、ronyms, Abbreviations, and Symbols. Not applicable. 8 Coding System This standard shall be referenced in other documents, drawings, etc., as follows: EDS-M-6034 9 Release and Revisions This standard was originated in October 1990. It was first approved by GMDAT Engineering Standards in October 1990.
22、 It was first published in October 1990. 3.2.5 +6 . 881 -F8t .,:958p) 1 -F7 3L:8$ 3.2.6 948 6|9I2e . 28T8 8*# 848 948 G7$ G.(%P )-e&8 4)%T 49P A d* .(:F 3L 8$) )=%L66 F$ . 3.2.7 28T# 1 881 -F72P -,!x)08 666 F$ . 3.3 38 -C E:.(: 9) 9P9I / -PF%L6$ . Issue / P9I8)Y Publication Date / 38 88 Description (Organization) / 9PP9I76 (:04.2P ) 3 SEP 2010 Superceded (Appearance Material Engineering Team) / F9I957 =* (Appearance Material 2XD4 )
