1、GM DAEWOO Auto & Technology EDSE ngineering,GM DAEWOO Auto & Technology.Standards SELF ADHESIVE FILM WITH COATING EDS-M-6805 ISSUED DATE: 1992. 03. 04 REVISEDDATE: 2003. 05. 16 VERSION: 3EDS-M-6805 SELF ADHESIVE FILM WITH COATING PAGE: 1/3 ISSUED DATE: 1992. 03. 04 REVISED DATE: 2003. 05. 16 VERSION
2、 3 GM DAEWOO Auto & Technology 1. PURPOSE This specification specifies the requirements of basic property for patterns and qualities of the label used in automotive engine room and exterior panel of frame 2. SCOPE This standard is applied to the explanation, cautions and decoration for parts of aut
3、omotive engine room and exterior panel. 3. MATERIAL Label which is applied with a protectant in one side of film and covered with silicon paper. 4. REQUIREMENTS DESIGNATION TEST METHOD SPECIFICATION4.1 Total thickness EDS-T-7624 -A 0.30 0.35 mm4.2 Weight per unit area EDS-T-7611 320 370 g/m 24.3 Str
4、ucture4.3.1 Protective coating(1) Material Transparent polyurethane(2) Thickness EDS-T-7624 -A 0.03 mm min.4.3.2 Film(1) Material Colored and lettered, soft PVC(2) Thickness EDS-T-7624 -A 0.09 mm min.4.3.3 Adhesive(1) Material Polyacryl acid ester/ Vinylacetate, Copolymer, Butadiene-Styrene Polymeri
5、de or equivalent material, It must meet clause 4.1.1.4.3.4 Protective paper(1) Material Paper coated with silicon in one side(2) Weight per unit area EDS-T-7611 130 g/m 2 min.(3) Thickness EDS-T- 7624-A 0.14 mm min.EDS-M-6805 SELF ADHESIVE FILM WITH COATING PAGE: 2/3 ISSUED DATE: 1992. 03. 04 REVISE
6、D DATE: 2003. 05. 16 VERSION: 3 GM DAEWOO Auto EDS-M- 0102). 7. AUTOMOTIVE RESTRICTED HAZARDOUS SUBSTANCES Materials and components of parts must comply with EDS-A-0101. 8. CODING SYSTEM This material specification shall be indicated in drawings or other specifications as follows. “EDS-M-6805”EDS-M-
7、6805 SELF ADHESIVE FILM WITH COATING PAGE: 3/3 ISSUED DATE: 1992. 03. 04 REVISED DATE: 2003. 05. 16 VERSION: 3 GM DAEWOO Auto & Technology 9. RELATED STANDARDS EDS-A-0101 Automotive restricted hazardous substances for parts EDS-M-0102 Procedures for approval of chemical raw material and quality control EDS-T-7611 Test method for determining weight per unit area EDS-T-7624 Test method for determining thickness of trim materials
