1、DAEWOO MOTOR CO., LTD. EDS Engineering, Daewoo motor co., ltd. Standards CLEANING SOLVENT EDS-M-8912 ISSUED DATE: 1985. 05. 07 REVISED DATE: 1995. 09. 01 VERSION: 2 Copyright Daewoo Motor Co., Ltd. All rights reserved PUBLISHED BY ENGINEERING STANDARD SECRETARIAT TECHNICAL CENTER (PUPYONG) CLEANING
2、SOLVENT EDS-M-8912 PAGE: 1/2 1. MATERIAL NAME Cleaning solvent 2. SCOPE For cleaning sticky area of the sheets at direct glazing in accordance with material release. Note : The cleaning solvent is allowed to be used only in connection with the glass primer EDS-M-8522 of the same suppliers. 3. GENERA
3、L DESCRIPTION Clourless to yellowish fluid on the base of Silane and monovalent alcohol Density +20 kg/l : 0.780 to 0.790 Boiling point (DIN 53 171) V 82 to 83 Burning point (DIN 51 755) V 12 to 15 4. NOTE Samples of materials or parts that follow this standard shall be approved by Test & Experiment
4、al Dept. before mass production & delivery. In the event of any modification form this standard, it is the sole responsibility of the supplier to inform the purchaser of all such modifications. Furthermore, the supplier shall submit the modified sample for reapproval by Test & Experimental Dept. bef
5、ore mass production & delivery. 5. REQUIREMENTS 5.1. Use No benzrestriction 5.2. Purity Free of suspending materials and mechanical pollution The degree of purity of each delivery shall be certified on a test certificate, especially with the remark that the thinner is delivered into cleaned containe
6、rs. 5.3. Boiling residue Vol. % : 1 to 5 5.4. Evaporation number (DIN 53 170) : 10 to 12 5.5. Treatment After the cleaning process, a thinner film shall remain so that a gut adhesion is achieved for the glass primer EDS-M-8522. 6. DELIVERY CLEANING SOLVENT EDS-M-8912 PAGE: 2/2 Delivery may be establ
7、ished by agreement between purchaser and supplier. 7. ADDITIONAL REQUIREMENTS 7.1. Danger class B(VbF) Limits of explosion Vol-% : lower 2 upper 12 Igniton temperature V 425 Ignition group : G 2 Emission class : III 7.2. Hazardous material Declaration due to ArbstoffV Hazard classification : Easily
8、inflammable Hazard symbol : F Declaration of spec. hazards : R: 11 Safety advice : S: 7-16 7.3. Environment protection Water-polluting material - Refer to plant directive 460/1, point 3.9. Waste disposal - Pay attention to plant directive 440 (see register of residue). Prohibited material contents - (see EDS-T-7804).
