1、 WORLDWIDE ENGINEERING STANDARDS Material Specification GMW3059 Restricted and Reportable Substances Copyright 2012 General Motors Company All Rights Reserved August 2012 Originating Department: North American Engineering Standards Page 1 of 23 1 Scope Note: Nothing in this standard supersedes appli
2、cable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. 1.1 Material Description. This specification lists substances whose use in materials and components, in the interests of personnel and environmental safet
3、y, are either prohibited or limited. 1.1.1 These restrictions are based on existing legislation or self-imposed regulations. 1.1.2 The aim of this specification is to restrict/stop the usage of the substances listed, as well as to facilitate compliance with current and future regulations. 1.1.3 For
4、additional information on GMW3059, including electronic versions of waiver form, Directive 2000/53/EC Annex II, frequently asked questions and the exemption process, see the web site http:. 1.2 Symbols. Not applicable. 1.3 Typical Applications. This specification applies to materials and a component
5、 specified by the purchaser and does include items where the design is held by the supplier, such as black box items. 2 References Note: Only the latest approved standards are applicable unless otherwise specified. 2.1 External Standards/Specifications. CEPA 1999 EU ELV 2000/53/EC GBT 27630-2011 ISO
6、 3892 DIN 50993-1 EU REACH Regulation (EC) No 1907/2006 ISO 3613 MLTM Note 2009-649 2.2 GM Standards/Specifications. GMW3034 GMW14270 GMW15634 GMW3116 GMW14375 GMW15635 2.3 Additional References. Automotive Industry Guideline on REACH: http:/www.acea.be/news/news_detail/REACH_guideline/ Canadian Sig
7、nificant New Activity (SNAc) Notices: http:/www.ec.gc.ca/subsnouvelles-newsubs/default.asp?lang=En Decabromodiphenyl ethane, CAS 84852-53-9 D Declarable if intentionally present in Canada market product Calcines, copper roasting, CAS 67711-89-1 D Declarable if intentionally present in Canada market
8、product C.I. Pigment Black 25, CAS 68186-89-0 D Declarable if intentionally present in Canada market product C.I. Pigment Violet 48, CAS 68608-93-5 D Declarable if intentionally present in Canada market product Zirconium, dipropylene glycol iso-Bu alc. neodecanoate propionate cobalt complexes, CAS 6
9、8988-10-3 D Declarable if intentionally present in Canada market product Cobalt, (2-ethylhexanoato-O)(isooctanoato-O)-, CAS 94246-88-5 D Declarable if intentionally present in Canada market product Electrolytes, copper-manufacturing, CAS 129618-35-5 D Declarable if intentionally present in Canada ma
10、rket product Solutions, copper hydrometallurgical, CAS 129618-36-6 D Declarable if intentionally present in Canada market product Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-GM WORLDWIDE ENGINEERING STANDARDS GMW3059 Copyright 2012 General Motors
11、 Company All Rights Reserved August 2012 Page 15 of 23 GM Requirements IN ADDITION to the GADSL: Substance Rating Requirement Detail Solutions, cobalt hydrometallurgical, CAS 129618-39-9 D Declarable if intentionally present in Canada market product Cyclohexanebutanoic acid, cobalt(2+) salt, CAS 385
12、82-17-1 D Declarable if intentionally present in Canada market product Zinc sulfide (ZnS), cobalt and copper-doped, CAS 72869-37-5 D Declarable if intentionally present in Canada market product Cobalt sulfate, CAS 10393-49-4 D Declarable if intentionally present in Canada market product Benzene, 1,1
13、-methylenebis4-isocyanato-, CAS 101-68-8 D Declarable if intentionally present in Canada market product Benzene, 1,1-methylenebis2-isocyanato-, CAS 2536-05-2 D Declarable if intentionally present in Canada market product Benzene, 1-isocyanato-2-(4-isocyanatophenyl)methyl-, CAS 5873-54-1 D Declarable
14、 if intentionally present in Canada market product Isocyanic acid, polymethylenepolyphenylene ester, CAS 9016-87-9 D Declarable if intentionally present in Canada market product Benzene, 1,1-methylenebisisocyanato-, CAS 26447-40-5 D Declarable if intentionally present in Canada market product 1,2-Be
15、nzenedicarboxylic acid, dicyclohexyl ester, CAS 84-61-7 D Declarable if intentionally present in Canada market product 1,2-Benzenedicarboxylic acid, butyl cyclohexyl ester, CAS 84-64-0 D Declarable if intentionally present in Canada market product 1,2-Benzenedicarboxylic acid, dimethyl ester, CAS 13
16、1-11-3 D Declarable if intentionally present in Canada market product 1,2-Benzenedicarboxylic acid, bis(phenylmethyl) ester, CAS 523-31-9 D Declarable if intentionally present in Canada market product 1,2-Benzenedicarboxylic acid, cyclohexyl 2-methylpropyl ester, CAS 5334-09-8 D Declarable if intent
17、ionally present in Canada market product 1,2-Benzenedicarboxylic acid, 2,2-dimethyl-1-(1-methylethyl)-3-(2-methyl-1-oxopropoxy)propyl phenylmethyl ester, CAS 16883-83-3 D Declarable if intentionally present in Canada market product 1,2-Benzenedicarboxylic acid, diisodecyl ester, CAS 26761-40-0 D Dec
18、larable if intentionally present in Canada market product 1,2-Benzenedicarboxylic acid, isooctyl phenylmethyl ester, CAS 27215-22-1 D Declarable if intentionally present in Canada market product Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-GM WORL
19、DWIDE ENGINEERING STANDARDS GMW3059 Copyright 2012 General Motors Company All Rights Reserved August 2012 Page 16 of 23 GM Requirements IN ADDITION to the GADSL: Substance Rating Requirement Detail 1,2-Benzenedicarboxylic acid, bis(methylcyclohexyl) ester, CAS 27987-25-3 D Declarable if intentionall
20、y present in Canada market product 1,2-Benzenedicarboxylic acid, diisononyl ester, CAS 28553-12-0 D Declarable if intentionally present in Canada market product 1,2-Benzenedicarboxylic acid, benzyl C7-9-branched and linear alkyl esters, CAS 68515-40-2 D Declarable if intentionally present in Canada
21、market product 1,2-Benzenedicarboxylic acid, di-C6-8-branched alkyl esters, C7-rich, CAS 71888-89-6 D Declarable if intentionally present in Canada market product Benzenamine, 4-octyl-N-(4-octylphenyl)-, CAS 101-67-7 D Declarable if intentionally present in Canada market product Benzenamine, 4-octyl
22、-N-phenyl-, CAS 4175-37-5 D Declarable if intentionally present in Canada market product Benzenamine, 4-(1-methyl-1-phenylethyl)-N-4-(1-methyl-1-phenylethyl)phenyl-, CAS 10081-67-1 D Declarable if intentionally present in Canada market product Benzenamine, 4-(1,1,3,3-tetramethylbutyl)-N-4-(1,1,3,3-t
23、etramethylbutyl)phenyl-, CAS 15721-78-5 D Declarable if intentionally present in Canada market product Benzenamine, 4-nonyl-N-(4-nonylphenyl)-, CAS 24925-59-5 D Declarable if intentionally present in Canada market product Benzenamine, ar-octyl-N-(octylphenyl)-, CAS 26603-23-6 D Declarable if intenti
24、onally present in Canada market product Benzenamine, ar-nonyl-N-phenyl-, CAS 27177-41-9 D Declarable if intentionally present in Canada market product Benzenamine, ar-nonyl-N-(nonylphenyl)-, CAS 36878-20-3 D Declarable if intentionally present in Canada market product Benzenamine, N-phenyl-, reactio
25、n products with 2,4,4-trimethylpentene, CAS 68411-46-1 D Declarable if intentionally present in Canada market product Benzenamine, N-phenyl-, styrenated, CAS 68442-68-2 D Declarable if intentionally present in Canada market product Benzenamine, 2-ethyl-N-(2-ethylphenyl)-, (tripropenyl) derivs, CAS 6
26、8608-77-5 D Declarable if intentionally present in Canada market product Benzenamine, N-phenyl-, (tripropenyl) derivs, CAS 68608-79-7 D Declarable if intentionally present in Canada market product Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-GM WO
27、RLDWIDE ENGINEERING STANDARDS GMW3059 Copyright 2012 General Motors Company All Rights Reserved August 2012 Page 17 of 23 GM Requirements IN ADDITION to the GADSL: Substance Rating Requirement Detail Benzenamine, N-phenyl-, reaction products with isobutylene and 2,4,4-trimethylpentene, CAS 184378-08
28、-3 D Declarable if intentionally present in Canada market product Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-GM WORLDWIDE ENGINEERING STANDARDS GMW3059 Copyright 2012 General Motors Company All Rights Reserved August 2012 Page 18 of 23 Appendix
29、E: Recycled Content Reporting Suppliers are required to report via IMDS the recycled content of their parts. Suppliers must report the weight percent range of postindustrial/pre-consumer recyclate, as well as post-consumer recyclate utilized in the part. Regrind/home scrap is not to be considered re
30、cycled content. For more information, refer to the IMDS manual on the GMW3059 web site (http:/). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-GM WORLDWIDE ENGINEERING STANDARDS GMW3059 Copyright 2012 General Motors Company All Rights Reserved Augu
31、st 2012 Page 19 of 23 Appendix F: Library of Needed and/or Useful Links EU Official Home Page: http:/europa.eu/index_en.htm. REACH Regulation: http:/eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2006:396:0001:0849:EN:PDF Automotive Industry Guideline on REACH: http:/www.acea.be/news/news_detai
32、l/REACH_guideline/ REACH Restriction List (Annex XVII): http:/echa.europa.eu/legislation/REACH_legislation_en.asp Environment Canada Chemicals Management Plan: http:/www.chemicalsubstanceschimiques.gc.ca/index-eng.php Prohibition of Certain Toxic Substances Regulation: http:/www.canlii.org/en/ca/law
33、s/regu/sor-2005-41/latest/sor-2005-41.html Canadian Significant New Activity (SNAc) Notices: http:/www.ec.gc.ca/subsnouvelles-newsubs/default.asp?lang=En&n=0F76206A-1 Global Source for Standards and Specifications: http:/ Provided by IHSNot for ResaleNo reproduction or networking permitted without l
34、icense from IHS-,-,-GM WORLDWIDE ENGINEERING STANDARDS GMW3059 Copyright 2012 General Motors Company All Rights Reserved August 2012 Page 20 of 23 Appendix G: Waivers Only Manufacturer/Supplier InformationAddress: Country: Phone: FAX:1. This partdoesnot contain substances listed in GMW3059 abovethe
35、reportinglimits. 2. This partdoescontain substances listed in GMW3059 abovethe reportinglimitsasdetailedbelow. Purposefor Useand PlantoEliminate Use IncludingTimingand SubstituteSubstancesWaiver Number: _Approved: Not Approved: Name:Company: DUNSNumber : Department: Mail Code(ifapplicable): Substanc
36、eMass %Substance in MaterialUnit Approval if “P”SubstancesPresent NameCASNumber Assembly (Asm)/PartInformationUnit Suppliedto: Asm/Part Mass: Comments:Material/SurfaceTreatment Mass %Materialin Component Signature:PrintedName/ GM Division: Date:NameAsm/Part Number: Asm/Part Name:Model Year/Vehicle L
37、ine: EngineTransmissionRPO(Family): RevisionDate: Standard Number Asm/Part RevisionLevel: Component in AssemblyMass NameSupplier CertificationPartNumber Signature:PrintedName:Date:Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-GM WORLDWIDE ENGINEERI
38、NG STANDARDS GMW3059 Copyright 2012 General Motors Company All Rights Reserved August 2012 Page 21 of 23 Instructions for Appendix G The form should be mailed to each unit that the part is being supplied to. If the part is being supplied to more than one unit, the form must be mailed to each unit. A
39、ssembly (Asm) Part Information: Title block: Enter the information that identifies the part being supplied. Asm/Part Number: Enter the part identification number assigned by the unit the part is being supplied to. Asm/Part Name: Enter the name of the part as assigned by the unit the part is being su
40、pplied to. Model Year/Vehicle Line: Enter the model year of the vehicle the part is being supplied for and the name of the vehicle. For Powertrain parts, enter the model year and Engine/Transmission Regular Production Option (RPO) (or family). Asm/Part Revision Level and Revision Date: Enter any inf
41、ormation that would identify what the most current level of revision and what date that last revision occurred. Unit Supplied to: Enter the name of the organization you are supplying the part to. A list of units along with contact information for each is in the Contact List. Asm/Part Mass: Enter the
42、 mass of the complete assembly being supplied. Comments: Enter any other information that would help identify the part. Manufacturer/Supplier Information: Title block: Supplier enters their information. Name: Enter contact name at the supplier. DUNS Number: Enter the DUNS Number that is supplying th
43、e part. Company: Enter company name that is supplying the part. Department: Enter the department within the supplier company that the contact belongs to. Mail Code (if applicable): Enter internal mail code if required within Supplier Company to get mail to the contact person. Address: Enter address
44、(including country), telephone number, and fax number for supplier. Declaration Section: Mark the applicable box. Component in Assembly: If there is more than one component in the assembly/part being supplied, enter the part number, name, and mass of the specific component that the reported substanc
45、e is found in. If there is more than one component that contains the reported substance, list all components that apply. If there is more than one reported substance, list all components that contain each substance. Material/Surface Treatment: Enter the standard number, name, and mass percentage of
46、the material or surface treatment that contains the restricted or reported substance. Substance: Enter the Chemical Abstracts Service (CAS) number, name, and mass percentage of the reported substance present in the material/surface treatment. Purpose for Use and Plan to Eliminate Use Including Timin
47、g and Substitute Substances: State the reason this substance must be used. Also state what plans are in place to eliminate the use of this substance, by what date the use will be eliminated, and what the substitute substance will be. Supplier Certification: Sign, print name and date to certify all l
48、isted information is true and correct. Unit Approval if “P” Substances Present: If the substance listed is a “P” substance, the unit the part is being supplied to must sign the form to approve the use. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-GM WORLDWIDE ENGINEERING STANDARDS GMW3059 Copyright 2012 General Motors Company All Rights Reserved August 2012 Page 22 of 23 Contact List Unit Contact: Unit: GME - Opel GM Holden GM North America Dept.: Corrosion Protection and Coating Systems M
