GOST 16256-1970 Chill moulds Eccentric core removers Construction and dimensions《金属铸型(硬模) 脱型芯用偏心夹具 结构及尺寸》.pdf

相关资源

GOST 16254-1970 Chill moulds Core removers (eccentric cramps) Construction and dimensions《金属铸型(硬模) 脱型芯用夹具 偏心夹板 结构及尺寸》.pdf

GOST 16255-1970 Chill moulds Eccentric console core removers Construction and dimensions《金属铸型(硬模) 脱型芯用悬臂式偏心夹具 结构及尺寸》.pdf

GOST 16257-1970 Chill moulds Rack core removers Construction and dimensions《金属铸型(硬模) 脱型芯用齿条式夹具 结构及尺寸》.pdf

GOST 16258-1970 Chill moulds Hydraulic core removers Construction and dimensions《金属铸型(硬模) 脱型芯用液压夹具 结构及尺寸》.pdf

GOST 16259-1970 Chill moulds Pneumatic core removers Construction and dimensions《金属铸型(硬模) 脱型芯用气动夹具 结构及尺寸》.pdf

猜你喜欢

AASHTO TP 86-2010 Standard Method of Test for Accelerated Aging of Bituminous Sealants and Fillers Using a Vacuum Oven.pdf

AASHTO TP 87-2010 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR).pdf

AASHTO TP 88-2010 Standard Method of Test for Evaluation of the Low-Temperature Tensile Property of Bituminous Sealants by Direct Tension Test.pdf

AASHTO TP 89-2010 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester.pdf

AASHTO TP 90-2016 Standard Method of Test for Measuring Interfacial Fracture Energy of Hot-Poured Crack Sealant Using a Blister Test.pdf

AASHTO TP 91-2015 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test.pdf

AASHTO TP 92-2014 Standard Method of Test for Determining the Cracking Temperature of Asphalt Binder Using the Asphalt Binder Cracking Device (ABCD).pdf

AASHTO TP 96-2013 Standard Method of Test for Protective Sealers for Portland Cement Concrete.pdf

AASHTO TP 98-2013 Standard Method of Test for Determining the Influence of Road Surfaces on Vehicle Noise Using the Statistical Isolated Pass-By (SIP) Method.pdf