GOST 16257-1970 Chill moulds Rack core removers Construction and dimensions《金属铸型(硬模) 脱型芯用齿条式夹具 结构及尺寸》.pdf

相关资源

GOST 16254-1970 Chill moulds Core removers (eccentric cramps) Construction and dimensions《金属铸型(硬模) 脱型芯用夹具 偏心夹板 结构及尺寸》.pdf

GOST 16255-1970 Chill moulds Eccentric console core removers Construction and dimensions《金属铸型(硬模) 脱型芯用悬臂式偏心夹具 结构及尺寸》.pdf

GOST 16256-1970 Chill moulds Eccentric core removers Construction and dimensions《金属铸型(硬模) 脱型芯用偏心夹具 结构及尺寸》.pdf

GOST 16258-1970 Chill moulds Hydraulic core removers Construction and dimensions《金属铸型(硬模) 脱型芯用液压夹具 结构及尺寸》.pdf

GOST 16259-1970 Chill moulds Pneumatic core removers Construction and dimensions《金属铸型(硬模) 脱型芯用气动夹具 结构及尺寸》.pdf

猜你喜欢

FORD ESH-M4D380-A-2009 POLYURETHANE FOAM LOW DENSITY SKINNED - FOAM IN PLACE TO BE USED WITH FORD WSS-M99P1111-A 《现场发泡有皮式低密度聚氨酯泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESH-M4D380-B-2009 POLYURETHANE FOAM LOW DENSITY - SKINNED - FOAM IN PLACE - WITH BIOCIDE TO BE USED WITH FORD WSS-M99P1111-A 《含抗微生物剂的现场发泡结皮低密度聚氨酯泡沫 与标准FORD WSS-M99P1111-A一起.pdf

FORD ESH-M4D390-A-2009 POLYURETHANE FOAM SOUND DEADENING - HEAT FORMED TO BE USED WITH FORD WSS-M99P1111-A 《热成型隔音聚氨酯泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESH-M4D415-A1-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热塑性聚烯径（TEO）吹塑成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESH-M4D415-A2-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热塑性聚烯径(TEO)弹性体吹塑成型料 与标准FORD WSS-M99P1111-A一起使用 列于标准F.pdf

FORD ESH-M4D560-A-2010 POLYPROPYLENE (PP) INJECTION MOLDING COMPOUND 36% GLASS FIBER AND MICA FILLED TO BE USED WITH FORD WSS-M99P1111-A 《36%玻璃纤维和云母填充的聚丙烯（PP）注塑成型料 与标准FORD WSS-M.pdf

FORD ESH-M6J149-A-2012 PRIMER ACRYLIC SOLVENT BASED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESH-M7C60-A-2012 RUST PREVENTIVE WATER DISPLACING - OIL TYPE TO BE USED WITH FORD WSS-M99P1111-A 《水和油置换型防锈剂 与福特WSS-M99P1111-A 一起使用》.pdf

FORD ESH-M8A6-A2-2003 BEARING STEEL BACKED TFE-PB IMPREGNATED BRONZE TO BE USED WITH FORD WSS-M99P1111-A 《四氟乙烯钢背轴承 浸聚丁烯的青铜》.pdf