GOST 21153 5-1988 Rocks Method for the determination of cut strength limit《岩石 挤压剪切强度极限测定法》.pdf

相关资源

SH T 0323-1992 润滑脂强度极限测定法.pdf

GOST 255-1990 Ebonite Determination of cross-breaking strength《硬橡胶 弯曲强度极限测定法》.pdf

GOST 4071 2-1994 Insulating refractory products Determination of cold compressive strength《绝热耐火制品 室温下压缩强度极限的测定方法》.pdf

GOST 310 4-1981 Cements Methods of tests of bending and compression strengths《水泥 挠性和挤压强度极限测定法》.pdf

GOST 13648 2-1968 Board Method of breaking stress and bending strength determination《纸板 在静力挠曲下负载能力和强度极限测定法》.pdf

GOST 16483 13-1972 Wood Method for determination of ultimate strength in cutting perpendicular to grain《木材 对木材纤维横向锯割的强度极限测定法》.pdf

GOST 16483 5-1973 Wood Methods for determination of ultimate shearing strength parallel to grain《木材 顺木材纤维方向劈砍时强度极限测定法》.pdf

GOST 21153 8-1988 Rocks Method for determination of triaxial compressive strength《岩石 体积挤压强度极限测定法》.pdf

GOST 19921-1974 Glued and bent blanks Method of determining ultimate strength in static bending《胶合的弯曲坏件 静弯曲强度极限测定法》.pdf

GOST 27034-1986 Sintered hard metals Method of compression and yield strength determination《烧结硬质合金 受压时强度极限及屈服点的测量方法》.pdf

猜你喜欢

STAS 627 5-1971 TYRE INNER TUBES FOR AGRICULTURAL TRAGTEURS MACIIINERIES AND TRAILERS Sizcs《农用拖拉机、机械和拖车用的内胎大小》.pdf

STAS 627 6-1984 AIR TUBES FOR MEANS OF FACTORY TRANSPORT AND HOISTING Sizes《工厂运输和起重方法用的气管大小》.pdf

STAS 630-1990 Files general technical requirements for quality《锉刀 一般质量技术要求》.pdf

STAS 632-1990 Engineers'files Flat files Dimensions《工程锉刀 平锉刀 尺寸》.pdf

STAS 633-1980 Metal working file SHARP PLAT FILE Dimensions.《金属加工锉刀 尖平锉刀尺寸》.pdf

STAS 634-1990 Engineers'files Roughing files Dimensions《工程锉刀 毛刻锉刀 尺寸》.pdf

STAS 635-1990 Engineers'files Hale-round files Dimensions《工程锉 半圆锉 尺寸》.pdf

STAS 636-1990 Engineers'files Threesquare files Dimensions《工程锉刀 三角锉 尺寸》.pdf

STAS 637-1990 Engineer's files Square files Dimensions《工程锉 方锉 尺寸》.pdf