GOST 21335-1975 Low knurled-head and cup-point screws Construction and dimensions《带滚花矮头及钻孔端螺钉 结构及尺寸》.pdf

相关资源

GOST 21336-1975 Low knurled-head and round-point screws Construction and dimensions《带滚花矮头及圆角端螺钉 结构及尺寸》.pdf

GOST 21337-1975 Low knurled-head and flat-dog point screws Construction and dimensions《带滚花矮头及圆柱端螺钉 结构及尺寸》.pdf

GOST 21332-1975 Low knurled-head screws Construction and dimensions《带滚花矮头螺钉 结构及尺寸》.pdf

GOST 21333-1975 Low knurled-head and cone-point screws Construction and dimensions《带滚花矮头及圆锥端螺钉 结构及尺寸》.pdf

GOST 21334-1975 Low knurled-head and step-point screws Construction and dimensions《带滚花矮头及台阶端螺钉 结构及尺寸》.pdf

猜你喜欢

ANSI IEEE C63.4A-2017 American National Standard for Methods of Measurement of Radio- Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to .pdf

ANSI IEEE C63.5-2017 American National Standard for Electromagnetic Compatibility Radiated Emission Measurements in Electromagnetic Interference (EMI) Control Calibration and Quali.pdf

ANSI IEEE C63.7-2015 American National Standard Guide for Construction of Test Sites for Performing Radiated Emission Measurements.pdf

ANSI IEEE C63.9-2008 American National Standard for RF Immunity of Audio Office Equipment to General Use Transmitting Devices with Transmitter Power Levels up to 8 Watts.pdf

ANSI IEEE C93.1-1999 Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVT).pdf

ANSI IEEE C93.3-2017 Requirements for Power-Line Carrier Line Traps (30 kHz to 500 kHz).pdf

ANSI IEEE C93.4-2012 Power-Line Carrier Line-Tuning Equipment (30 kHz to 500 kHz) Associated with Power Transmission Lines.pdf

ANSI IEEE C95.1-2005 Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields 3 kHz to 300 GHz.pdf

ANSI IEEE N317-1980 Performance Criteria for Instrumentation Used for Inplant Plutonium Monitoring.pdf