GOST 21712-1983 Piezoelectric resonators Main characteristics《压电谐振器 基本参数》.pdf

相关资源

JB T 11047.1-2010 脱硫包 第1部分 基本参数.pdf

JB T 11813.1-2014 纵剪机 第1 部分：型式和基本参数.pdf

JB T 3356-1992 低温液体容器 基本参数.pdf

JB T 6391.1-1992 起重机滑接输电装置 型式和基本参数.pdf

MT 330-1993 XG.XC系列 立井大型多绳箕斗卸载设备基本参数.pdf

MT 331-1993 JL系列 立井大型多绳箕斗基本参数.pdf

GB T 5170.20-2005 电工电子产品环境试验设备 基本参数检定方法 水试验设备.pdf

GB T 5170.21-2008 电工电子产品环境试验设备基本参数检验方法 振动(随机)试验用液压振动台.pdf

GB T 5170.5-1996 电工电子产品环境试验设备基本参数检定方法 湿热试验设备.pdf

CB- 3180-1983 船用离心式泥泵型式与基本参数.pdf

猜你喜欢

ASD-STAN PREN 3509-1998 Aerospace Series Steel FE-PL1501 (30CrMo12) Air Melted Hardened and Tempered Bar De Less Than or Equal to 40 mm 1 050 MPa Less Than or Equal to Rm Less Than.pdf

ASD-STAN PREN 3510-1997 Aerospace Series Heat Resisting Steel FE-PA2602 (X4NiCrTiMoV26-15) Solution Treated and Precipitation Treated Bar and Section De Less Than or Equal to 100 m.pdf

ASD-STAN PREN 3511-1999 Aerospace Series Steel FE-PL1801 (100Cr6) Vacuum Induction Melted and Consumable Electrode Remelted Softened Bar for the Manufacture of Machined Bearings a .pdf

ASD-STAN PREN 3512-1999 Aerospace Series Steel FE-PL1801 (100Cr6) Vacuum Induction Melted and Consumable Electrode Remelted Hardened and Tempered Hollow Bars for the Manufacture of.pdf

ASD-STAN PREN 3513-1988 Aerospace Series Steel FE-PL711 Hardened and Tempered 900 Less Than or Equal to Rm Less Than or Equal to 1100 MPa Bar and Wire De Less Than or Equal to 45 m.pdf

ASD-STAN PREN 3514-1988 Aerospace Series Steel FE-PL711 Hardened and Tempered 1100 Less Than or Equal to Rm Less Than or Equal to 1300 MPa Bar and Wire for Bolts De Less Than or Eq.pdf

ASD-STAN PREN 3515-1998 Aerospace Series Steel FE-PL8201 (41NiCrMo2) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 25 mm 1 100 MPa Less Than or Equal to Rm Les.pdf

ASD-STAN PREN 3516-1998 Aerospace Series Steel FE-PL8201 (41NiCrMo2) Air Melted Softened Forging Stock a or D Less Than or Equal to 300 mm (Edition P2)《航空航天系列 a或D≤300mm的FE-PL8201(4.pdf

ASD-STAN PREN 3517-1994 Aerospace Series Steel FE-PL2105 Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 150 mm 1080 MPa Less Than or Equal to Rm Less T.pdf