1、A.C.N. 006 893 232Holden LimitedEngineering DepartmentMATERIAL SPECIFICATIONNUMBERSHEETRELEASEREVISION:HN 17741 of 2April, 1985September, 2000NAME: HYDRAULIC SEALANT - ANEROBICTHIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TOTHE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TO CONFIRMTHE
2、 DOCUMENT ISSUE DATE IS STILL VALID.FORM : I:LABRTORYFORMSTDMATSPEC.DOC1. DESCRIPTIONThe material defined by this specification is a methacrylate ester which cures inanerobic conditions in combination with metallic surfaces to form a tough plasticlike seal. It is a Fast curing material which possess
3、es excellent resistance tohydraulic oils, fuels and chemicals. It has higher strength than HN1755 and willcure faster.2. PROPERTIES2.1 Colour - Brown2.2 Viscosity at 22 C - 400 CPS2.3 Gap filling - Up to 0.12mm2.4 Temperature range - -55 C to 150 C3. APPROVAL, INSPECTION AND REJECTIONRefer HN 1000,
4、Clauses A and C.4. HAZARDOUS MATERIALSRefer HN 1000, Clause H.5. RESTRICTED CHEMICALSRefer HN 1000, Clause J.6. APPROVED SUPPLIERS AND MATERIALSAPPROVED SUPPLIER APPROVED MATERIALLoctite Australia Loctite 569A.C.N. 006 893 232Holden LimitedEngineering DepartmentMATERIAL SPECIFICATIONNUMBERSHEETRELEA
5、SEREVISION:HN 17742 of 2April, 1985September, 2000NAME: HYDRAULIC SEALANT - ANEROBICTHIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TOTHE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TO CONFIRMTHE DOCUMENT ISSUE DATE IS STILL VALID.FORM : I:LABRTORYFORMSTDMATSPEC.DOC7. REFERENCESHN1755 HN 10008. REVISIONSSeptember, 2000 - Editorial and Formatting corrections.- Expanded section 3 into sections 3, 4 and 5.- Added References section.
