1、ABN 84 006 893 232 GM Holden Limited Engineering Department MATERIAL SPECIFICATION NUMBER SHEET RELEASE REVISION : HN 2011 1 of 2 December, 1989 June, 2006 NAME: SPACER - RUBBER THIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TO THE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TO CONFIRM
2、 THE DOCUMENT ISSUE DATE IS STILL VALID. FORM : I:CentralLaboratoryStandardForms MaterialSpecificationMatspec.doc 1. SCOPE The material described in this specification is a series of elastomeric spacers of various shapes, sizes and colours. They all have a pressure sensitive adhesive backing. 2. TYP
3、ES TYPE TITLE DESCRIPTION TYPE 1 Standard Series Moulded coloured spacers with rubber pressure sensitive adhesive. TYPE 2 Resilient Rollstock Rubber spacers, die-cuttable to a variety of shapes and sizes with a nominal Shore A Hardness of 75 and a rubber pressure sensitive adhesive. TYPE 3 Resilient
4、 Rollstock Rubber spacers, die-cuttable to a variety of shapes and sizes with a nominal Shore A Hardness of 35 and an acrylic pressure sensitive adhesive. TYPE 4 Clear Protector Series Clear elastomer with an acrylic pressure sensitive adhesive. 3. APPROVAL, INSPECTION AND REJECTION Refer HN 1000, C
5、lauses A and C. 4. HAZARDOUS MATERIALS Refer HN 1000, Clause H. 5. RESTRICTED AND REPORTABLE SUBSTANCES Refer HN 1000, Clause J. ABN 84 006 893 232 GM Holden Limited Engineering Department MATERIAL SPECIFICATION NUMBER SHEET RELEASE REVISION : HN 2011 2 of 2 December, 1989 June, 2006 NAME: SPACER -
6、RUBBER THIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TO THE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TO CONFIRM THE DOCUMENT ISSUE DATE IS STILL VALID. FORM : I:CentralLaboratoryStandardForms MaterialSpecificationMatspec.doc 6. APPROVED SUPPLIERS AND MATERIALS Material known to mee
7、t the full requirements of this specification: APPROVED SUPPLIER APPROVED MATERIAL SJ 5018 SJ 5008 TYPE 1 SJ 5508 SJ 5832 0.8 mm SJ 5816 1.6 mm TYPE 2 SJ 5808 3.2 mm 3M Company TYPE 4 SJ 5303 5.0 mm 7. REFERENCES HN 1000 8. REVISIONS September 1997 - Types redefined. - Additional approved materials
8、added to Type 1. - Additional approved materials added to Type 2. - Approved material for Type 4 added. - Inspection, rejection, certification, hazardous materials and restricted chemicals clauses added. - Approved Sources specification obsolete. June, 2006 - Revised section “1.SCOPE” and “2.TYPES” - removed reference to 3M - Added section “7. REFERENCES” Prepared by: Y. Zia
