1、ABN 84 006 893 232 GM Holden Limited Engineering Department MATERIAL SPECIFICATION NUMBER SHEET RELEASE REVISION : HN 2146 1 of 2 March, 1994 June, 2006 NAME: SEALER AIR DRY THIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TO THE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TO CONFIRM THE
2、 DOCUMENT ISSUE DATE IS STILL VALID. FORM : I:CentralLaboratoryStandardForms MaterialSpecificationMatspec.doc 1. DESCRIPTION The material described in this specification is a high solids air dry sealer based on synthetic elastomer and is paintable. 2. FUNCTION The material is designed for rectifying
3、 skips and pinholes in body seam sealers. It skins rapidly and can be painted within a few minutes of application. 3. PROPERTIES 3.1 Viscosity Brookfield Spindle 7, 20 RPM 25C 280 PaS +/- 15% 3.2 Solids (HN 0013) 70% min. 3.3 Specific Gravity (ASTM D816) 1.2 1.4 3.4 Tack Free Time at 25 C 13 minutes
4、 max. 3.5 Adhesion Must give cohesive failure to primed, top coat and PVC surfaces. 3.6 Staining (HN 0096 A + B) No staining. 4. APPROVAL, INSPECTION AND REJECTION Refer HN 1000, Clauses A and C. 5. HAZARDOUS MATERIALS Refer HN 1000, Clause H. ABN 84 006 893 232 GM Holden Limited Engineering Departm
5、ent MATERIAL SPECIFICATION NUMBER SHEET RELEASE REVISION : HN 2146 2 of 2 March, 1994 June, 2006 NAME: SEALER AIR DRY THIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TO THE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TO CONFIRM THE DOCUMENT ISSUE DATE IS STILL VALID. FORM : I:CentralLab
6、oratoryStandardForms MaterialSpecificationMatspec.doc 6. RESTRICTED AND REPORTABLE SUBSTANCES Refer HN 1000, Clause J. All components present in materials supplied to this specification must comply with Australian NICNAS (National Industrial Chemicals Notification and Assessment Scheme) obligations.
7、 7. APPROVED SUPPLIERS AND MATERIALS Material known to meet the full requirements of this specification: APPROVED SUPPLIER APPROVED MATERIAL Henkel Terolan-Light (Terolan-Hell) 8. REFERENCES HN 0096 HN 1000 HN 0013 ASTM D816 9. REVISIONS July, 2000 - Editorial and Formatting corrections. - Reference
8、s section added. - Section 4, expanded into sections 4, 5 and 6. June, 2006 - Updated the properties in sections “3.1 Viscosity”, “3.2 Solids”, “3.3 Specific Gravity”, “3.4 Tack Free Time at 25 C”, “3.5 Adhesion” and “3.6 Staining” (of section “3.PROPERTIES”) to reflect the new sealer, Terolan-Hell. - Section “6. RESTRICTED AND REPORTABLE SUBSTANCES” - inclusion of reference to NICNAS - Section “7.APPROVED SUPPLIERS AND APPROVED MATERIALS” - Replaced the approved material with Terolan-Hell. Prepared by Y. Zia
