1、ABN 84 006 893 232 GM Holden Limited Engineering Department MATERIAL SPECIFICATION NUMBER SHEET RELEASE REVISION : HN 2464 1 of 1 March, 2006 NAME: AUTOMATIC TRANSMISSION FLUID DEXRON VI THIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TO THE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE T
2、O CONFIRM THE DOCUMENT ISSUE DATE IS STILL VALID. FORM : I:CentralLaboratoryStandardForms MaterialSpecificationMatspec.doc 1. SCOPE This specification covers a petroleum based fluid for use as an initial fill of GM Holden automatic transmissions. The fluid must meet all technical requirements of GM
3、Material Specification 9986153. Additions, exceptions are noted below. 2. REFERENCES HN 1000 ASTM D6304 GMN10060 GM Material Specification 9986153 3. PROPERTIES Water Content (ASTM D6304) 0.10 %w/w (max). 4. APPROVAL, INSPECTION AND REJECTION Refer HN 1000, Clauses A and C. 5. HAZARDOUS MATERIALS Re
4、fer HN 1000, Clause H. 6. RESTRICTED AND REPORTABLE SUBSTANCES Refer HN 1000, Clause J. All components present in materials supplied to this specification must comply with Australian NICNAS (National Industrial Chemicals Notification and Assessment Scheme) obligations. 7. APPROVED SUPPLIERS AND MATERIALS Material known to meet the full requirements of this specification: APPROVED SUPPLIER APPROVED MATERIAL Petro-Canada RDL 3434 Prepared by: Maria Lasic
