1、A.C.N. 006 893 232 Holden Limited Engineering Department MATERIAL SPECIFICATION NUMBER SHEET RELEASE REVISION : HN 2467 1 of 2 June, 2005 NAME: TEMPORARY PROTECTIVE (ELECTROSTATIC) TAPE THIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TO THE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TO
2、 CONFIRM THE DOCUMENT ISSUE DATE IS STILL VALID. FORM : I:CentralLaboratoryStandardForms MaterialSpecificationMatspec.doc 1. DESCRIPTION The tape described in this specification is made of transparent PVC film. It does not have any adhesive backing but clings to the surface of painted and non painte
3、d panels by its electrostatic properties. It is sensitive to heat and humidity and reduces its adhesive properties within a couple of months. 2. REFERENCES HN 1000 3. APPLICATIONS Protects the surfaces and it is suitable for inside factory use only. The film must be removed before the vehicle leaves
4、 the plant. A static cling film does not have enough bond strength to remain on the exterior of the vehicle during shipping, wind and etc. 4. PROPERTIES 4.1 Thickness 0.15 +/- 0.02 mm 4.2 Material soft transparent PVC film 5. APPROVAL INSPECTION AND REJECTION Refer HN1000, Clauses A and C. 6. RESTRI
5、CTED AND REPORTABLE SUBSTANCES Refer HN1000, Clause J. A.C.N. 006 893 232 Holden Limited Engineering Department MATERIAL SPECIFICATION NUMBER SHEET RELEASE REVISION : HN 2467 2 of 2 June, 2005 NAME: TEMPORARY PROTECTIVE (ELECTROSTATIC) TAPE THIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION T
6、O THE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TO CONFIRM THE DOCUMENT ISSUE DATE IS STILL VALID. FORM : I:CentralLaboratoryStandardForms MaterialSpecificationMatspec.doc 7. APPROVED SUPPLIERS AND MATERIALS Material known to meet the full requirements of this specification: APPROVED SUPPLIER APPROVED MATERIAL SAMSUNG PSL CO. LTD Transparency Static Electricity Tape Prepared by; Y. Zia
