ICONTEC 1152-1982 《干电池》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6119-2012 0694 Standard Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic 《团纱地板覆盖物由足摩擦产生明显表面变化的标准操作规程》.pdf

ASTM D6120-1997(2007) Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature《室温下阳极和阴极碳材料电阻的标准试验方法》.pdf

ASTM D6120-1997(2012) 8696 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature《室温下阳极和阴极碳材料电阻的标准试验方法》.pdf

ASTM D6120-1997(2017)e1 7316 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature《室温下阳极和阴极炭材料电阻率的标准试验方法》.pdf

ASTM D6121-2006a Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles《评价在低速和高.pdf

ASTM D6121-2008 809 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles.pdf

ASTM D6121-2008a 431 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles.pdf

ASTM D6121-2008b 752 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles.pdf

ASTM D6121-2009 3125 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles《主动双.pdf