ICONTEC 1514-1979 《水泥，通过勒沙特列针来测量其膨胀性》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 19210-2017 Adhesives Wood adhesives for non-structural applications Determination of tensile shear strength of lap joints《粘合剂 用于非结构应用的木材粘合剂 搭接接头抗拉剪切强度的测定》.pdf

BS ISO 19212-2006 Adhesives - Determination of temperature dependence of shear strength《粘合剂 测定温度与剪切强度的关系》.pdf

BS ISO 19213-2017 Implants for surgery Test methods of material for use as a cortical bone model《外科植入物 用作皮质骨模型的材料的试验方法》.pdf

BS ISO 1922-2012 Rigid cellular plastics Determination of shear strengt《硬质泡沫塑料 剪切强度的测定》.pdf

BS ISO 19229-2015 Gas analysis Purity analysis and the treatment of purity data《气体分析 纯度分析和纯度数据处理》.pdf

BS ISO 19233-1-2017 Implants for surgery Orthopaedic joint prosthesis Procedure for producing parametric 3D bone models from CT data of the knee《外科植入物 矫形关节假体 利用膝关节CT数据生成三维骨模型的程序》.pdf

BS ISO 19235-2015 Analogue quartz clocks Timing accuracy《指针式石英钟 计时精度》.pdf

BS ISO 19238-2014 Radiological protection Performance criteria for service laboratories performing biological dosimetry by cytogenetics《辐射防护 采用细胞遗传学进行生物剂量测定的工作实验室的性能标准》.pdf

BS ISO 1924-3-2005 Paper and board - Determination of tensile properties - Constant rate of elongation method (100 mm min)《纸和纸板 抗张性能的测定 恒速拉伸法(100 mm min)》.pdf