ICONTEC 1577-1980 《非亚铁金属，铜以及铜合金类，中间微粒尺寸的估算》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CNS 4997-1979 Short Machine Taps and Hand Taps《短柄机力螺丝攻与手扳螺丝攻》.pdf

CNS 4998-1979 Long Shank Machine Taps with Nominal Diameters from 3 to 24 mm《长柄机力螺丝攻（标称直径自3MM至24MM）》.pdf

CNS 4999-1979 Hand Taps for Pipe Threads for Parallel and Taper Threads-General Dimensions and Marking《用于平行及推拔管螺纹之手扳螺丝攻（一般尺度及标示）》.pdf

CNS 5000-1984 Ground Thread Taps for ISO Metric Threads of Tolerances 4H to 8H and 4G to Coarse and Fine Pitches-Manufacturing Tolerances on the Threaded Portion《螺丝攻磨制螺纹公差（用于4H至8H及.pdf

CNS 5001-2000 Assembly tools for screws and nuts-Driving squares for hand socket tools and power socket wrenches《螺钉及螺帽之装配工具-方驱动头》.pdf

CNS 5002-1998 Assembly tools for screws and nuts - Machine-operated square drive sochet wrenches test torques series E《螺钉及螺帽之装配工具–机动套筒扳手（E级扭矩）》.pdf

CNS 5003-2000 Assembly tools for screws and nuts-Hexagon drive ends for hand -and machine-operated screwdriver bits《螺钉及螺帽之装配工具–起子头六角驱动头》.pdf

CNS 5004-1992 Reflex Reflectors for Pedal Bicycles《自行车（脚踏车）用反光板》.pdf

CNS 5005-1979 Rubber Vulcanization Accelerator CBS (N-cyclo Hexyl-2-benzothiazyl Sulfenamide)《硫化促进剂CBS（N–环己基–2–苯噻唑亚磺醯胺）》.pdf