ICONTEC 1842-1983 《度量衡，普通精度型秤砣》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D1005-A2-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) HIGH MELT FLOW 22% MINERAL FILLED FULLY PAINTED ONLY MOLDING COMPOUND FASCIA THIN-WALLED EXTERIOR TO BE USED WIT.pdf

FORD WSS-M4D1005-A2-2016 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) HIGH MELT FLOW 22% MINERAL FILLED FULLY PAINTED ONLY MOLDING COMPOUND FASCIA THIN-WALLED EXTERIOR TO BE USED WIT.pdf

FORD WSS-M4D1005-B1-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) HIGH MELT FLOW LOW DENSITY 17% MINERAL FILLED MOLD-IN-COLOR ONLY MOLDING COMPOUND FASCIA THIN-WALLED EXTERIOR T.pdf

FORD WSS-M4D1005-B1-2018 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) HIGH MELT FLOW LOW DENSITY 17% MINERAL FILLED MOLD-IN-COLOR ONLY MOLDING COMPOUND FASCIA THIN-WALLED EXTERIOR T.pdf

FORD WSS-M4D1005-B2-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) HIGH MELT FLOW LOW DENSITY 17% MINERAL FILLED FULLY PAINTED ONLY MOLDING COMPOUND FASCIA THIN-WALLED EXTERIOR T.pdf

FORD WSS-M4D1005-B2-2018 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) HIGH MELT FLOW LOW DENSITY 17% MINERAL FILLED FULLY PAINTED ONLY MOLDING COMPOUND FASCIA THIN-WALLED EXTERIOR T.pdf

FORD WSS-M4D1006-A1-2013 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 55 DUROMETER D HARDNESS BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D1006-A2-2013 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 70 DUROMETER D HARDNESS BLOW MOLDING COMPOUND.pdf

FORD WSS-M4D1009-A1-2012 POLYAMIDE (PA) 66 HEAT STABILIZED 20% GLASS FIBER REINFORCED BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热稳定20%玻璃纤维增强聚酰胺(PA)66吹塑材料 与福特WSS.pdf